Mitel Forums - The Unofficial Source
Mitel Forums => Mitel Software Applications => Topic started by: jeanlejacmar on August 22, 2012, 02:40:38 AM
-
Nupoint build version 14.1.0.45.01
ICP version 4.1 SP2
Made simple call flow with "hang up" action at the end.
But NuPoint Port is not disconnected at the end of the flow.
After calling the extension with the call flow programmed, on the calling party's display next is shown in sequence:
-"Call Parked by Nupoint"
-"Nupoint Port xx" (xx is port number)
-
Call flow image in attachment.