Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - v2win

Pages: 1 [2] 3 4 ... 42
17
Mitel MiVoice Business/MCD/3300 / Re: Faulty ethernet ports
« on: May 24, 2018, 08:34:15 AM »
Is it possible that the vlan tagging is enabled on the controller?

Try connecting a serial cable and tying vlan_off and see if you can ping the controller.

18
Also get rid of the leading 00 in the IP address field.

19
What type of switch?

20
It kind of sounds like the ARP table or forwarding table in the switch is getting cleared but your ping is keeping it active.

21
Any interface errors on the switch?

Move to different ports on the switch or a different switch all together?

22
Anything in the windows event viewer?

23
Mitel MiVoice Business/MCD/3300 / Re: System Speed Call
« on: January 26, 2018, 09:24:29 AM »
Check for a DISA number in miscellaneous


24
Mitel SX200, SX2000, and older SX platforms / Re: Old SX2000 Dark
« on: January 22, 2018, 02:27:24 PM »
I kind of miss working on those old hunks of metal.

25
Mitel Software Applications / Re: Micollab IDS Connection
« on: December 15, 2017, 01:34:56 PM »
I think the port is 636 for secure LDAP

26
Mitel MiVoice Business/MCD/3300 / Re: Really confused with setting up COR
« on: December 08, 2017, 01:26:12 PM »
Ralph actually has a really good how to article on this.

http://www.mitelforums.com/articles/mitel_ars_programming.php

27
The way Mitel is buying the competition its starting to remind me of Nortel back in the day.

28
Mitel Software Applications / Re: Screen Recorder Error
« on: July 11, 2017, 12:54:55 PM »
Maybe try to run the installer as administrator?

right click --> run as administrator

29
Mitel MiVoice Business/MCD/3300 / Re: Automatic Dial 8
« on: May 30, 2017, 08:51:08 AM »
v2win, be sure your ARS doesn't have 1+10 without the 9.
If that works then it's a behavior change.
I'll have to find time to test.

Ralph


I did check that to make sure I wasn't losing my mind

30
Mitel MiVoice Business/MCD/3300 / Re: Automatic Dial 8
« on: May 27, 2017, 03:17:02 PM »
I tested with an analog station as well as a 5340. The trunks were SIP

Pages: 1 [2] 3 4 ... 42