Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: ASCStech on March 09, 2010, 10:45:45 PM

Title: Qsig message trace
Post by: ASCStech on March 09, 2010, 10:45:45 PM

Hi, new to the site and fairly new to the MITEL.
I have an MXE3300 linked to another vendor by QSIG. on previous PABX's i have been able to display the QSIG/DPNSS messages that go between the two PABX's. i need to identify what digits are being sent accross the links so that i can manipulate for the CPN substitution. is there any way I can do this with the MITEL MXE. the EDT trace messages don't give enough info.

Title: Re: Qsig message trace
Post by: Mitel100 on March 10, 2010, 02:26:37 AM

What I would do is have a CCS trace running on each system and see what digits are being sent and then received.

Title: Re: Qsig message trace
Post by: ASCStech on March 24, 2010, 11:40:39 PM

Thanks Mitel100, don't know why i didn't see that in the mtce commands. the output is exactly what i wanted to see. spoke to the other vendor suppotrt and turns out they weren't sending CLI. All good now Cheers
 :)