Recent Posts

1

MiVoice Office 250/Mitel 5000 / Re: How to connect a node to a remote paging system

« Last post by JeffonJohnsIsland on Today at 04:49:08 PM »

TE,

Thanks for the kind words.  I am looking forward to retirement.  Last day is the 17th!  Best wishes to everyone who is still plugging away installing and dealing with phone permissions.  Take care, hope the years are good to everyone.

I should also say, paging is working using the solution you suggested.  I just measured the approximate distance we have from the node to the paging system and found it's 1354 feet.  Even after realizing using a trunk port is different than sending line level audio across the wires, I am still pleasantly surprised it works.  Thanks for suggesting the solution--you gave me the encouragement to try it!

Jeff

2

MiVoice Office 250/Mitel 5000 / Re: Mivoice 250 Auto Attendant

« Last post by JeffonJohnsIsland on Today at 04:38:30 PM »

Wouldn't it be nice to have a way to track how a call routes through the AA!??!!

When you say it's a Hunt Group, I am confused.  Hunt Groups only ring to a phone or group of phones.  It sounds like the call is routing to a CRA, since you have prompts and options.

To make a Hunt Group ring at more than one extension, I create an Hunt Group extension List, and include all the numbers I want it to ring at the same time.  I don't know if that's the best way, it's just the way I learned to ring more than one extension for a Hunt Group.

If the call is routed to a CRA, there could be timing issues in the CRA configuration.  If it is a CRA, I might be able to help with the timing issues. 

Thanks,
Jeff

3

MiVoice Office 250/Mitel 5000 / Mitel says IP Networking license (840.0224) is no longer available??????????????

« Last post by JeffonJohnsIsland on Today at 01:59:39 PM »

We have purchased a few more licenses before end of license sales.  Our vendor says Mitel said the IP Networking license (840.0224) license isn't available for sale now, we were considering buying one or two to take the nodes from 6 to unlimited concurrent calls.

  Mitel said end of license sales would be end of June as I recall.  It's hard to understand why Mitel isn't willing to sell licenses, given they don't have to manufacture a license and it REALLY ticks me off they said end of license sales at the end of June, now they won't sell this license. 

If someone has a node they have retired, can we transfer the license from that node to our node?  I don't know how license transfers work...is it possible to transfer from one company to another?  If we buy an node from someone and they transfer ownership, does the node come with the licenses which were on the node?  Our vendor has a few HX nodes that were retired, if we buy one of those and it had an unlimited IP Network license, do we get to keep the unlimited IP network license?

Any other suggestions?  If all else fails, we could run the node which we wanted to upgrade to unlimited IP Network connections from a node that has unlimited licenses, not my favorite solution.   

Thanks again for all the help,
Seven days until this isn't a problem (retirement),
Jeff

4

Aastra - MiVoice Office 400 and MiVoice MX-One / Re: No Outgoing calls after upgrade to version7.0 SP1HF2

« Last post by robert.moore on Yesterday at 06:32:24 AM »

Went to site to do with wire shark trace . I observed that the invite were all cancelled .Issues resolved after the Draytek firmware was upgrade to  the current level . Also changed the port in the 400 to Gamma   61166 to 5060 i.e.88.215.63.3:61166. to 88.215.63.3:5060 However, it worked when the software was on  version 4.
 
 Thanks

5

MiVoice Office 250/Mitel 5000 / Re: Mivoice 250 Auto Attendant

« Last post by Spztc1 on May 03, 2024, 12:18:20 PM »

Thanks TE!
Yes it is going to a hunt group.  I did try removing the entire prompt menu and readding it.  I also tried prompt 4 instead of 3 but got the same results.  Prompt 1 and 2 work without hesitation.  Prompt 3 and 4 will repeat the submenu recording and the on the 3rd try it will ring but not the group, it rings to a single extension within the group.  It is very odd.
We are getting the following message when signing into the system could that have something to do with it?
Message:
Voice Mail did not reconcile Application(s) with Call Processing

I thought it was a timing issue because if you call in and just press the prompts without listening to the menu it works fine.  I just can't seem to find a setting that fixes anything.

Is there a tool I could use to trace the call as it moves through the AA? 

Thanks again!

6

Mitel MiVoice Business/MCD/3300 / Re: Help finding how a mailbox is getting to a menu

« Last post by lundah on May 01, 2024, 09:01:27 AM »

Look in "VM Multi-Level Auto Attendants", your mailbox should be in there.

7

Mitel MiVoice Business/MCD/3300 / Help finding how a mailbox is getting to a menu

« Last post by thenewguy on April 30, 2024, 03:47:39 PM »

I have a 3300 (no micollab or nupoint).When the pilot number is called it hits a extension 8000, if not answered it goes to a menu box with press 1 for this and 2 for that.  I can find the mailboxes for 1,2 ,3 of the menu.  The 8000 does not have a mailbox and I am having trouble finding how to change the menu.  I am used to mailboxes being on micollab and cant get this figured out.  Any advice on how to find where this mailbox is that controls the menu.  I am sure its right in front of me.  Thanks in advance.

8

MiVoice Office 250/Mitel 5000 / Re: How to connect a node to a remote paging system

« Last post by Tech Electronics on April 30, 2024, 08:53:10 AM »

Jeff,

I remember when you first got on the forums awhile back so it is good to hear that you are going to finally get to retire and enjoy your time there.

Thanks,

TE

9

MiVoice Office 250/Mitel 5000 / Re: MiVoice Office 250 - Night Ring

« Last post by lundah on April 29, 2024, 05:11:09 PM »

You'd have to set up the additional phone that you want to do this as an administrator phone, either through the System Admin tool or there's a way to do it from an existing administrator phone. That procedure is listed on page 18 of the MiVoice Office Administrator Phone Guide on edocs.mitel.com.

10

MiVoice Office 250/Mitel 5000 / MiVoice Office 250 - Night Ring

« Last post by vtyree on April 29, 2024, 02:34:59 PM »

Hello all,

We have the Mitel 5340e IP Phone system. I'm currently the admin over the phone so my phone is the only one that has the "night ring" feature button. I often leave before everyone else and it gets forgotten. Can I add the "night ring" button to another phone?