Mitel Forums - The Unofficial Source

Mitel Forums => SIP On Mitel => Topic started by: cisco on February 08, 2016, 11:18:23 AM

Title: configured mitel 5235
Post by: cisco on February 08, 2016, 11:18:23 AM

HI , i have mitel 5235 and i want connect it with free pbx (elastix) to send receive calls  how access  mitel phone by web browser  to set

extension no# and  The remaining settings thanks...

Title: Re: configured mitel 5235
Post by: acejavelin on February 09, 2016, 03:11:19 PM

You have to put the phone in SIP mode and load the firmware.

Title: Re: configured mitel 5235
Post by: cisco on February 10, 2016, 12:24:59 PM

thanks for reply , but i want more explain about steps ( step by step) thanks again ...

Title: Re: configured mitel 5235
Post by: acejavelin on February 10, 2016, 06:39:36 PM

http://www.voip-info.org/wiki/view/Mitel+MiNET+to+SIP+Conversion

Title: Re: configured mitel 5235
Post by: twinturbo on February 20, 2016, 11:59:00 AM

Get phone into SIP mode.

Connect to web interface.

browse to "Admin Tools > user list config"

Add a new user

Set user ID, Display Name, SIP Authorisation Username to the asterisk extension number.
Set  User Authentication Password to the asterisk extension password.

Set SIP Proxy Server & Sip registration server to the asterisk IP.