Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Nathan

Pages: [1]
1
Thanks for the reply

i have Keep Alive set on for all the systems its in the default setting
Ping - YES
ping interval - 60sec
ping failure threshold - 1

most sites are running a Mikrotik router as the gateway with various internet connections - NBN - 4G - HFC etc

we are using commander as the primary SIP provider at present 

2
Hi Everyone

i have multiple Mitel 5000s installed on SIP Trunks with different providers, intermittently they require a reboot as all inbound calls stop working

i can see the SIP is still connected/Registered with the provider a 200 OK
because the SIP is still registered when this happens the calls don't follow the failover destination setup by the SIP provider either 

i can take the service in and out of service this makes no difference to the inbound calls until i reboot the system then it works fine for a few weeks until it happens again

has anyone else experienced this ??

3
Thanks for the responses

the customer has upgraded from a key system that showed the individual extension name and numbers on screen 
and were hoping this system could do the same,


4
Hi everyone,

 i have a release level 8.0 standalone Mitel 3300 with 5340e handsets
i want the handsets extension number to display on the top of the screen
i have changed "hotdesk login except" to "yes" in class of service but the handset display has not changed

does anyone have any ideas ??

thanks

Nathan

Pages: [1]