Mitel Forums - The Unofficial Source
Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: jchristman2002 on January 09, 2022, 02:40:55 PM
-
I did the Mitel MiVB training in 2015 and then again this past December, but we have been doing exclusively MiVoice Office 250 systems and I have not had to touch a MiVB system until now. I have an AX controller with a DSP II MMC, a T1/E1 MMC, and a 4+12 Combo card. I am trying to configure an analog extension for a fax machine on the on the 4+12 card and for the life of me I cannot figure out the PLID. I guess my understanding of this number is all wrong. We never actually discussed this in class and I have been through the engineer guide, hardware technical manual, general installation guide, technician's handbook, and troubleshooting guide as well as the Primer and for the life of me I am either too dense or missing it somewhere.
If anyone has a quick, this this this way of describing it for me that would be great. Or at a minimu what would the PLID be for the first analog port on a 4+12 card in the first available slot in an AX controller.
Your help is so appreciated.
Thanks,
Jon
-
Under hardware moules asu is there a unit set? If so under card assignment has the card been set?
-
Yep. Port 1 Unit 3 AX Card Chasis
-
Go to users advanced analog sets
-
Its blank.
-
forgot to attach
-
Sure card assignment is filled out?
-
Bingo. That is what I missed.
Thanks for ht help. On a Sunday no less. :)