Messages

1

Mitel MiVoice Business/MCD/3300 / Re: What are the best option to do a firmware update on Teleworker phones

« on: Today at 02:02:08 PM »

That's good to know, I'll test it out and capture some logs to see if it does goes to that port. Thanks!

2

Mitel MiVoice Business/MCD/3300 / Re: What would your best practice for setting up firewall rule for the MBG

« on: Today at 10:22:56 AM »

Yes I did, are they considered the best practice then?

3

Mitel MiVoice Business/MCD/3300 / Re: What are the best option to do a firmware update on Teleworker phones

« on: Today at 10:21:20 AM »

doesn't hackers usually use the tftp protocol to gain access to servers for this case which is the MBG server and why tftp is usually not considered safe to allow through the firewall.

4

Mitel MiVoice Business/MCD/3300 / What would your best practice for setting up firewall rule for the MBG

« on: Today at 09:23:45 AM »

What would your best practice for setting up firewall rule for the MBG???

5

Mitel MiVoice Business/MCD/3300 / Re: What are the best option to do a firmware update on Teleworker phones

« on: Today at 09:19:36 AM »

wouldn't that protocol be unsecured? Is there a way for something like sftp or https setup on MBG to have the phones updated?

6

Mitel MiVoice Business/MCD/3300 / What are the best option to do a firmware update on Teleworker phones

« on: Yesterday at 07:02:00 PM »

Is there another way beside the TFTP to update the firmware on teleworker phones?

7

Mitel MiVoice Business/MCD/3300 / How to upgrade the firmware of Mitel RFP 12 Base station

« on: January 02, 2024, 02:47:51 PM »

We have been using a SIP phone Dect 112 with RFP 12 Basestation and we always make sure our devices are up to date with firmware. How do I update the firmware on the RFP 12 Base station?

8

Mitel MiVoice Business/MCD/3300 / Is my IPV6 enabled on Mitel Server

« on: November 24, 2023, 03:54:36 PM »

Is there a way to find out if IPV6 is enabled or disabled on different types of mitel server? I want to make sure its disabled.

3300
MBG
Micollab

9

Mitel MiVoice Business/MCD/3300 / Re: Is there any way to Play a Recorded Greeting on a Page Group or External Paging

« on: September 28, 2023, 01:54:52 PM »

The only way possible is to get an external device to play the recordings over the PA.  Something like a Viking DNA-510 is what you are looking for.  You put it in as a trunk or analog extension on the system, analog station would be easiest.  As an analog extension you just call the extension and enter the announcement number you want to trigger and it will play over the PA.

Got couple of more question on how it works.

What kind of announcement is going to use, is it the Direct Page or the Loudspeaker Paging?
Once i set it up as an analog line, how do you do the paging? If I call the extension and it starts playing the recorded message and then dial the announcement number. Would it put the analog line on hold and i'll be at the part where I can do the loudspeaker paging?

10

Mitel MiVoice Business/MCD/3300 / Re: Is there any way to Play a Recorded Greeting on a Page Group or External Paging

« on: September 28, 2023, 09:13:00 AM »

Awesome thanks, i'll look it up.

11

Mitel MiVoice Business/MCD/3300 / Is there any way to Play a Recorded Greeting on a Page Group or External Paging

« on: September 27, 2023, 04:00:23 PM »

I'm trying to see if I can setup like an emergency announcement either over the phone using the page group or and external paging device by simply dialing a number. Is that doable on a mitel 3300? Thanks!

12

Mitel Software Applications / How to export Mailbox List from micollab server Nupoint Web Console

« on: January 27, 2023, 11:59:24 AM »

Good Day fellas, We have a micollab server where we setup all of our users, we have been renaming users to reassign extension to a new user when a previous one quits. Today I just discovered that even If we edit all the details from users and services form it doesnt update the advanced um email address. Is there a way to generate a report on the Unified Messaging Information for each mailbox. We have renamed already quite a bit of people and I would hate to go to each one to check if there is a different way to do it. Thanks!

13

Mitel Software Applications / Re: Micollab Client 9.1.3.2.0.2 Blank page loading after installation

« on: January 18, 2021, 01:01:01 PM »

Thanks, I had been cleaning any Mitel folders that the client left behind. Upon further testing its not that its blank, its not updating the page. if I resize the window it will show where I can put in the registration key. If I type it wont update the screen and If I resize it again it will show what I have typed. I didn't want to deal with it anymore since its a windows 7 machine and is already a security issue by itself. Reimaged PC to windows 10 problem fixed! 

14

Mitel Software Applications / Micollab Client 9.1.3.2.0.2 Blank page loading after installation

« on: December 31, 2020, 11:07:52 AM »

We upgraded our server and is currently upgrading from micollab client 7.3 to 91.3. Other users that I have installed this to works fine except for this one, i cant even get to enter the registration key as the page is blank. Below is the computer specs, run a repair on the .net framework and still not working. Uninstalled cleaned everything in registry, left behind folders and reboot. Install and reboot and still same thing. Users internet speed is 6 MB down and .59 up when i run a speed test. User is working from home and im installing it remotely.

OS - Windows 7 sp1
CPU - intel i5
RAM - 4 GB
HDD - 30 GB Free
.net framework 4.7

15

Mitel MiVoice Business/MCD/3300 / Re: How to properly setup polycom soundstation Duo to resolve DNS

« on: November 07, 2019, 03:21:05 PM »

Its has NTP settings but all are host name based pre configured, cant add any new ones.