Mitel Forums - The Unofficial Source
Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: 129qwerty on September 17, 2013, 06:38:15 AM
-
Hi Guys,
Do any of you know if Mivoice for Lync will work in a Citrix environment? I cannot see on MOL any suggestion it does not work.
UCA Basic works on Citrix with the standard .msi loaded...
Mivoice operates but for only 1 x user at a time. Could this be a mis-configuration on the customers network?
Thanks.
-
Can you elaborate on what you mean by?
"Mivoice operates but for only 1 x user at a time. Could this be a mis-configuration on the customers network?"
Not sure if you mean you an only get one UCA client to function if you are runnig Citrix.
-
Can you elaborate on what you mean by?
"Mivoice operates but for only 1 x user at a time. Could this be a misconfiguration on the customers network?"
Not sure if you mean you an only get one UCA client to function if you are rung Citrix.
Yes, correct. Only 1 x Mivoice UCA client would function on the Citrix thin clients at any one time. I had 4 x Mivoice UCA Client's configured. If 1 x Client logged out any of the others could Login ok but only 1 at a time.
-
Hi Guys,
When 1 x user is already Logged into Mivoice for Lync and another tries to Login to their own Mivoice for Lync client. They recieve the below error.
"Sync Engine has stopped working; Close the Program"
The Mivoice Clip-on is not available after this error appears, so I cannot produce a problem report from the affected client.
The original Logged in user is still functioning fine.
-
Confirmed with Mitel this is not supported in Xenapp Citrix environment. Apparently due Phase 2 of Mivoice for Lync app.