Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - alejonomada

Pages: [1]
1
Mitel MiVoice Business/MCD/3300 / Mitel 3300 Lapse set time stored
« on: January 22, 2016, 09:17:04 AM »
 :-[  Good day ladies and gentlemen, on this occasion my question is this, as the central achievement save more than 3 days of call records before being captured through the port 1752. hyperterminal thank you very much

2
Mitel MiVoice Business/MCD/3300 / help with call routing
« on: November 17, 2015, 09:36:44 AM »
Good day, I need help to get if they call 3 numbers configured in the central always calls are directed to a specific number. eg if the call 555-5263, 555-5264, 555-5267 these calls are directed to 555-5290.
Thank you :D

3
Mitel MiVoice Business/MCD/3300 / Re: save calls in txt archive
« on: May 21, 2015, 09:23:26 AM »
ok, thanks a lot .ready, I'm already getting the data from my mitel. another query I receive these data could be selected from the data center that need to see when you connect via telnet. eh seen as identical to mine other Central and view your files that are generated are different smdr have more information as I show here is the data of both mitel ......


mitel 1:

 05/19 12:55A 0000:00:16 3005         1013005 77713010          A X9999                                 222   2223005                                 I2222870 A         





mitel 2:

03/01 06:26A 00:00:13 1344      98433902                  A X999

4
Mitel MiVoice Business/MCD/3300 / Re: save calls in txt archive
« on: May 20, 2015, 03:18:04 PM »
ok please tellme how i do this , with telnet . thanks

5
Mitel MiVoice Business/MCD/3300 / Re: save calls in txt archive
« on: May 20, 2015, 01:42:56 PM »
I could connect a computer to receive these data hperterminal calls the printer port??

6
Mitel MiVoice Business/MCD/3300 / Re: save calls in txt archive
« on: May 20, 2015, 01:28:09 PM »
thanks , yes is ok  then write ...LOGSYS READ smdr NEWEST 20000 and thos showme the calls, thanks a lot ralph

7
Mitel MiVoice Business/MCD/3300 / Re: save calls in txt archive
« on: May 20, 2015, 01:24:28 PM »
thanks, but ,in maintenance and commands, It does not allow me to write logs, onl logys not logs

i have a mitel 3300

8
Mitel MiVoice Business/MCD/3300 / save calls in txt archive
« on: May 20, 2015, 01:13:44 PM »
hi people, wanted to know if you have way to get data calls made with the central mitel to save this data and a txt file, for billing of calls.
thanks a lot

9
Mitel MiVoice Business/MCD/3300 / Re: Help with mitell 3300 and R2 NSU
« on: May 15, 2015, 10:33:22 AM »
Read the fail, the fail was the company of telephone. and now my mitel is ok, and no have an alarm. cool!! ;D

10
Mitel MiVoice Business/MCD/3300 / Help with mitell 3300 and R2 NSU
« on: April 22, 2015, 11:43:31 AM »
good, greetings to all, I need help regarding my failure mitell 3300. I have problems with time sync between my central and service provider. connect my main supplier by a node NSU r2. and after a time of 10 minutes the call is dropped. Colocare below the fault shown me.( i paste the error, this fail is every 10 minuts)
My provider tells me to be a failure at the time of relog between central and them, that should change this time or disable synchronization Sync to synchronize only with the supplier.



| WARN GW | 15/04/22 11:00:15 | D-channel DOWN on AFC link 1 [dch.cpp @ 1316] | 1234
| warn AFC | 15/04/22 11:00:15 | D-channel is DOWN on link 1 | 6
| info AFC | 15/04/22 11:00:15 | Link 1 down due to PRI | 2
| info AFC | 15/04/22 11:00:16 | MTNETSNC phase shifts: 1 | 8
| warn AFC | 15/04/22 11:00:16 | MTNETSNC unstable phases: 93: 0fe 0fe 0fe 0fe 0fe 0fe 0fe 0fe 1fe | info AFC | 15/04/22 11:00:16 | MTNETSNC select clock sync for link 0 health is PASSED | 8
| WARN GW | 15/04/22 11:00:16 | D-channel DOWN on AFC link 0 [dch.cpp @ 1316] | 1234
| info AFC | 15/04/22 11:00:16 | MTNETSNC disable netsync source link 1 requested | 8
| warn AFC | 15/04/22 11:00:18 | D-channel is DOWN on link 0 | 6
| info AFC | 15/04/22 11:00:18 | Link 0 down due to PRI | 2
| warn AFC | 15/04/22 11:00:18 | layer 1 FRAME alarm ACTIVE for link 1 | 6
| warn AFC | 15/04/22 11:00:18 | D-channel is forced DOWN for link 1 | 6
| warn AFC | 15/04/22 11:00:18 | layer 1 FRAME alarm ACTIVE for link 0 | 6
| warn AFC | 15/04/22 11:00:18 | D-channel is forced DOWN for link 0 | 6
| ERROR GW | 15/04/22 11:00:20 | [T1-C10] LINE FSM ERROR : Event<LINE_CLR_BWD> occurred in state<LINE | ERROR GW | 15/04/22 11:00:20 | [T1-C11] LINE FSM ERROR : Event<LINE_CLR_BWD> occurred in state<LINE | ERROR GW | 15/04/22 11:00:20 | [T1-C13] LINE FSM ERROR : Event<LINE_CLR_BWD> occurred in state<LINE | ERROR GW | 15/04/22 11:00:20 | [T1-C15] LINE FSM ERROR : Event<LINE_CLR_BWD> occurred in state<LINE R2Error 11h00m20s-810 [T1-C10] Error in UAPI_DISCONNECT_INDICATION: can = 0 
R2Error 11h00m20s-840 [T1-C11] Error in UAPI_DISCONNECT_INDICATION: can = 0 
R2Error 11h00m20s-870 [T1-C13] Error in UAPI_DISCONNECT_INDICATION: can = 0 
R2Error 11h00m20s-960 [T1-C15] Error in UAPI_DISCONNECT_INDICATION: can = 0 
| WARN GW | 15/04/22 11:00:21 | D-channel UP on AFC link 0 [dch.cpp @ 1316] | 1234
| WARN GW | 15/04/22 11:00:21 | D-channel UP on AFC link 1 [dch.cpp @ 1316] | 1234
| INFO GW | 15/04/22 11:00:23 | CP STAT: CP60M-OUT 184 CP60M-IN 166 [cp.cpp @ 959] | 1234
CP STAT: CP60M-OUT 184 CP60M-IN 166
| warn AFC | 15/04/22 11:00:23 | layer 1 ALERT ALL CLEARED alarm clear for link 1 | 6
| warn AFC | 15/04/22 11:00:23 | layer 1 ALERT ALL CLEARED alarm clear for link 0 | 6
| warn AFC | 15/04/22 11:00:23 | D-channel is up on link 0 | 6
R2Error 11h00m25s-815 [T1-C10] Error in UAPI_DISCONNECT_CONFIRMATION: can = 0 
R2Error 11h00m25s-845 [T1-C11] Error in UAPI_DISCONNECT_CONFIRMATION: can = 0 
R2Error 11h00m25s-875 [T1-C13] Error in UAPI_DISCONNECT_CONFIRMATION: can = 0 
R2Error 11h00m25s-980 [T1-C15] Error in UAPI_DISCONNECT_CONFIRMATION: can = 0 
| info AFC | 15/04/22 11:00:29 | Link 0 up (PRI) | 2
| warn AFC | 15/04/22 11:00:29 | layer 1 FRAME alarm clear for link 0 | 6
| warn AFC | 15/04/22 11:00:29 | layer 1 REMOTE FRAME alarm clear for link 0 | 6
| warn AFC | 15/04/22 11:00:29 | D-channel is up on link 1 | 6
| info AFC | 15/04/22 11:00:34 | Link 1 up (PRI) | 2
| warn AFC | 15/04/22 11:00:34 | layer 1 FRAME alarm clear for link 1 | 6
| warn AFC | 15/04/22 11:00:34 | layer 1 REMOTE FRAME alarm clear for link 1 | 6
| info AFC | 15/04/22 11:00:34 | Slips enabled for netsync link 0 | 18
| info AFC | 15/04/22 11:00:34 | MTNETSNC switching to long term accumulator mode for link 0

11
Introduction and Announcements / hi from Venezuela
« on: February 26, 2015, 04:07:46 PM »
hi every body. hi from venezuela, i have a mitel 3300 and two r2 nsu. i need help wiht teh r2 nsu for configuration, i need change the ip of that. thanks  :)

12
Mitel MiVoice Business/MCD/3300 / Re: Connecting NSU
« on: February 26, 2015, 09:35:06 AM »
Quote from: v2win on August 26, 2009, 09:39:44 PM
Also you can flip switch 6 (i think) on the back and it will change it from NT to LT so you dont have to change your cable.

The default IP address on an NSU is 192.168.1.1

hiu i need help, how i can change the IP of my R2 NSU??

Pages: [1]