86
« on: November 08, 2010, 03:34:02 AM »
Our basic HP config is as follows ( simple and seems to work well)
int 24
name "mitel"
Vlan 1
name "data"
ip address 10.100.10.10 255.255.255.0
untagged 1-23,25-28
exit
vlan 2
name "voice"
ip address 172.16.1.254 255.255.255.0
untagged 24
tagged 1-23,25-28
qos priority 5
voice
exit
ip routing
ip route 0.0.0.0 0.0.0.0 10.100.10.1
lldp run
- The mitel we have as 172.16.1.2 , 255.255.255.0 gateway 172.16.1.254 ( hp switch)
- in its DHCP server we dont provide any vlan options
The phone boots up and does a dhcp request
the switch recognises it as a voice device and forces it into vlan 2 where it does another dhcp request
the mitel's port is forced into Vlan 2 and every packet leaving it is tagged as vlan 2
- the mitel supplies the dhcp for phones
- our server in the 10.100.10 network supplies any laptops / pc's with DHCP
our gateway 10.100.10.1 has a static route to the 172.16.1.0 network as follows
route 172.16.1.0 255.255.255.0 10.100.10.10
- ie route all 172.16.1.0 packets to the HP switch
The most important command is the "untagged in vlan2 for the Mitel port"