Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: johnp on June 28, 2019, 01:17:36 AM

Title: Analog MWL
Post by: johnp on June 28, 2019, 01:17:36 AM

Have a new site going in with several AX controllers, all running the latest v8 software. I have all anaog sets with a descriptor that has message waiting lamp enabled. Customer has a NEC system and from what I see, the MWI should be compatible i.e. high DC voltage. Yes I am experiencing an issue, system says light should be liy but set doesn't indicate such. I don't think I am missing anything in the programming, had a coworker on site with a meter and he saw no voltage change.

Anyone doing MotelHotel with AX and lighting lights on the latest v&?

Title: Re: Analog MWL
Post by: acejavelin on June 28, 2019, 12:40:02 PM

Sure... lots of them actually... Never had an issue.

Title: Re: Analog MWL
Post by: Mikrotik on August 11, 2022, 03:21:19 AM

Any update on the above issue. I am also facing similary issue.

Title: Re: Analog MWL
Post by: johnp on August 15, 2022, 05:11:10 PM

I think it was a combination of analog descriptor settings and COS settings

Title: Re: Analog MWL
Post by: Mikrotik on August 16, 2022, 03:42:29 PM

Quote from: johnp on August 15, 2022, 05:11:10 PM

I think it was a combination of analog descriptor settings and COS settings

Did u remember the settings. I have message waiting enabled under analog descriptor and COS settings but lamp is not turning on.

Title: Re: Analog MWL
Post by: johnp on August 18, 2022, 06:47:32 PM

Is it a known phone to work with Mitel's lamp lighting?