Mitel Forums - The Unofficial Source
Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: ScottL on June 21, 2019, 08:41:50 AM
-
I have a major alarm on of of our PBXs: "There is a mismatch between the Trunks - Used count in the System Capacity form and the trunk count output by the Alarm maintenance command." What is this command, and how do I use it?
The building that uses that PBX uses copper lines for part of the operation. They lost these lines for a half hour today. Does this alarm have anything to do with it?
Other information: We've been getting alarms, then they clear, for the twelve hours. (This happens when it rains, Consolidated has no idea what is causing them.)
Here's one of the alarms:
Alarm details on SCJ(192.168.41.30)
Date: Fri, 21 Jun 19 07:52:54 -0400
System alarm status: Major
Number of categories: 3
1) Category Name: Digital Links
Total: 1
Unavailable %: 100
Alarm Level: Major
Minor Threshold: 101
Major Threshold: 0
Critical Threshold: 101
2) Category Name: NETSYNC source
Total: 1
Unavailable %: 100
Alarm Level: Minor
Minor Threshold: 0
Major Threshold: 101
Critical Threshold: 101
3) Category Name: Trunks
Total: 43
Unavailable %: 53
Alarm Level: Major
Minor Threshold: 0
Major Threshold: 10
Critical Threshold: 100
Any help is appreciated!
Scott
-
I am not sure I understand the question... You have 43 trunks programmed in the system, and obviously at least one is a digital trunk (likely an ISDN PRI circuit), the remaining trunks are likely SIP or analog trunks.
The alarm you are getting is an indication the digital trunk is going down... 99% of the time this is a carrier issue.
This part is very confusing: "I have a major alarm on of of our PBXs: "There is a mismatch between the Trunks - Used count in the System Capacity form and the trunk count output by the Alarm maintenance command." What is this command, and how do I use it?"
Where are you seeing this, in the system logs? I have never seen this before...
-
Hi Scott,
is this your primary mcd or a resilient?
regards,
Tom