Messages

46

Mitel MiVoice Business/MCD/3300 / Re: padlock

« on: December 23, 2009, 03:00:10 AM »

I could not call any number while padlock is activated, even operator number 0 also.



dh

47

Mitel MiVoice Business/MCD/3300 / Re: padlock

« on: December 22, 2009, 08:07:58 AM »

when this feature is activated from the set, is their way to call internal number unless its de-activated.



dh_

48

Mitel MiVoice Business/MCD/3300 / mitel I & M

« on: October 11, 2009, 06:57:01 AM »

Could any one tell.... what will be mitel  I & M  basic & Advance training modules stand for?


dh_lab

49

Mitel MiVoice Business/MCD/3300 / system backup

« on: October 09, 2009, 06:23:47 AM »

Any one tell me what wll happen if i  load controller A, backup to a contoller B?
both contoller is a Mxe with R8 but different version.

dh_lab

50

Mitel MiVoice Business/MCD/3300 / Re: suite DID

« on: July 08, 2009, 02:08:35 AM »

all,
i tried the option that mentioned by v2win, but it shows the system main number for outgoing CLI and incomming is working with speed calls like as mentioned.
my DID range is " 7301 to 7650" and suite pilot number is 1001 to 1650.
I need without cahnging the suite pilot number to show the CLI as a DID number.



dh_lab

51

Mitel MiVoice Business/MCD/3300 / Mitel ASU II Through a Fiber Network?

« on: July 03, 2009, 04:40:59 AM »

Any one knows is it possible to extendant ASU 11, thought fiber network? I am hving 3300 mxe R8.0, required lenth is 230M from 3300 controller.

note: fiber network is a single mode,

dh_lab

52

Mitel MiVoice Business/MCD/3300 / suite DID

« on: July 01, 2009, 11:01:14 AM »

Any one tell me what will be the configuration to be needed to display DID from the suite, and Suite configurations are "pilot number is 1001 and extensions are 2001, 3001 & 4001". I need DID number 5557301 to display from suite 1001 and all incoming to 5557301 to route to a suite 1001. (DID ranges are 5557301 to 5557650) total 350 DID numbers.Now what I can do is 1001 is substituting under DID to 5557301 and the problem is have to enter one bye one & cannot give range. The DID index is only 100, but I need 350 suites to be configure like that.

dh_lab

53

Mitel MiVoice Business/MCD/3300 / Re: 5330 sets

« on: May 21, 2009, 11:06:52 AM »

Thank you bobcheese, it works fine..

dh_lab

54

Mitel MiVoice Business/MCD/3300 / Re: 5330 sets

« on: May 17, 2009, 03:58:39 AM »

Attached the MSG given  , while enabling two features!

55

Mitel MiVoice Business/MCD/3300 / 5330 sets

« on: May 16, 2009, 10:02:37 AM »

any body knows why cannot active call forwarding profile from 5330 sets, from 5212 it is working fine, COR & COS are same as 5212 sets but from 5330 sets i cannot?

dh_lab

56

Mitel MiVoice Business/MCD/3300 / Re: SIP Analog Telephone Adapter: Model : VIP-158

« on: May 16, 2009, 10:00:13 AM »

both end cannot hear and it is on same subnet.cannot say it is an network issues because the x-lite is working fine,

dh_lab

57

Mitel MiVoice Business/MCD/3300 / SIP Analog Telephone Adapter: Model : VIP-158

« on: May 14, 2009, 03:52:26 AM »

I am having problem with SIP Analog Telephone Adapter: Model : VIP-158, When i configure in 3300 ICP i cannot make calls,can receive calls, but cannot hear any body.
So what will be the reason for it?


dh_lab

58

Mitel MiVoice Business/MCD/3300 / Re: 5302 set

« on: March 19, 2009, 01:41:13 AM »

System R8.0.7.16_2 and the phones configured with DHCP, i tried with satic and it was same.


dh_lab

59

Mitel MiVoice Business/MCD/3300 / 5302 set

« on: March 18, 2009, 04:36:52 PM »

i am new to forum like to help from yours,
i am having 5302 sets i found that sometimes i caant use those sets, because sometimes when i dialing from it it gets disconnect, but from the system it shows inservices.
Does anyone know what will be the issues?

dh_lab