Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: gimitel on January 19, 2011, 01:44:57 PM

Title: Upgrade 3300 ICP from Rel 9.0 to MCD4.1
Post by: gimitel on January 19, 2011, 01:44:57 PM

Guys, i have an mitel 3300 icp running on rel 9.0.
Can someone tell me how to upgrade to mcd 4.1 without lossing the configurations and license?


Regards,


Gimitel

Title: Re: Upgrade 3300 ICP from Rel 9.0 to MCD4.1
Post by: bluewhite4 on January 19, 2011, 01:47:16 PM

All depends on controller model type and software assurance.

There are several guides on MOL about this very subject. The release notes for 4.X also go over it.

The watered down version is that you have to go to 4.0, do a database type change within the software, and then can go to 4.1.

Title: Re: Upgrade 3300 ICP from Rel 9.0 to MCD4.1
Post by: gimitel on January 19, 2011, 03:40:37 PM

So when upgarding from 9.0 to MCD4.0 i have to backup and restore the database through the software installer tools ? and repeat these steps when upgrading from 4.0 to 4.1 ?

Thanks ,

Gimitel

Title: Re: Upgrade 3300 ICP from Rel 9.0 to MCD4.1
Post by: bluewhite4 on January 19, 2011, 03:42:46 PM

Yes and no. You use the software tool to go from 9 to 4.0. Then you follow the instructions in help to change the database over to SDS mode. Once thats done, you can use the software tool again to go from 4.0 to 4.1.

Title: Re: Upgrade 3300 ICP from Rel 9.0 to MCD4.1
Post by: Mattmayn on January 20, 2011, 07:25:25 AM

Check the hardware requirements first. There are several limitations.

Title: Re: Upgrade 3300 ICP from Rel 9.0 to MCD4.1
Post by: gimitel on January 21, 2011, 03:27:57 PM

Guys thanks for the info.Do you mean help file when you log in into the 3300 ICP ?