Mitel Forums - The Unofficial Source
Mitel Forums => Mitel SX200, SX2000, and older SX platforms => Topic started by: robert.moore on January 18, 2023, 01:09:45 PM
-
I have a couple of SX 2000. I have a dial up using Procomm . The modem connects but I need help how to get the forms
-
Start by entering ctl-q then ctl-w.
The menu keys are esc+(button) listed on bottom of screen.
Ralph
-
Thanks Ralf ,
Still not happening . When I press CTL +Q follow by CTL W , nothing happens
-
Is the modem connected directly to the serial port on the PBX, or is there something in between?
-
Yeah, I think it goes through a machine we call tracker
-
Yeah, I think it goes through a machine we call tracker
Is that an SMDR/Call Data buffer or your remote access device?
-
Are you getting past the tracker password ?
-
No, I am not getting anything coming up , When I press Control Q and Control W , nothing happens.
The last time I used it on another site, Once you press control W it refreshes the screen an escape key brings the login screen.
Very frustrating now
Thanks
-
If your accessing via a tracker you may need to enter the tracker password usually PASSWORD in upper case then use CTL +Q or CTL +W
-
Correction
If your accessing via a tracker you may need to enter the tracker password the default is PASSWORD in upper case then type ;ME before using Ctrl and W
-
When i type the tracker password , it comes up tracker 2650 on-line but the CRT +Q ESC does nothing
-
Type ;ME This enables the Maintenance Mode
Press the <RETURN> The Tracker responds with
-
Sorry missed a bit
So when the tracker comes up tracker 2650 on-line Type ;ME This enables the Maintenance Mode
Press the <RETURN> The Tracker responds with OK then enter Ctrl and W keys refreshes the screen and presents one of the SX-2000 maintenance modes on the Maintenance Terminal screen.
-
Thanks for the update . I will give that a go!