Mitel Forums - The Unofficial Source
Mitel Forums => Mitel SX200, SX2000, and older SX platforms => Topic started by: Curtin_BPW on February 23, 2022, 09:46:34 AM
-
Is there any way to trace the data ports on the SX-200. I know you can do this for PRI through port 2002 but wondering if anyone knows if there is a similar method for the ports assigned in Form 12 to see the raw data for PMS ports themselves.
-
No there isn't... Almost every PMS system has a way to do this though, but have you played with the Mitel PMS Emulator? It allows you to use your laptop to emulate a PMS system and send/receive data from the phone or voicemail interface.
https://drive.google.com/file/d/1xqKYmW0sAvRfpSeqveUdoWxgoWJ3c5Lx/view?usp=sharing