Topics

1

Mitel MiVoice Business/MCD/3300 / Mitel - Openser/Kamailio/OpenSips

« on: September 21, 2010, 04:59:30 PM »

Hi!

Does anyone have tried to make this?

SIP Phone ----> Openser -----> Mitel -----> Mitel Phone

192.168.10.133 -> Sip Phone
200.xx.xx.xx -> OpenSer
192.168.2.1 -> Mitel ICP 3300

For some reason I can't make it work.

Code: [Select]

192.168.10.133 -> 200.xx.xx.xx SIP/SDP Request: INVITE sip:220@200.xx.xx.xx, with session description
200.xx.xx.xx -> 192.168.10.133 SIP Status: 100 Giving a try
200.xx.xx.xx -> 192.168.2.1  SIP/SDP Request: INVITE sip:220@200.xx.xx.xx, with session description
192.168.2.1 -> 200.xx.xx.xx SIP Status: 100 Trying
192.168.2.1 -> 200.xx.xx.xx SIP Status: 404 Not Found
404 Not Found -> How could it be? I'm dialing 220 (my extension). May be there is a secret for this trunk..

I have tried everything with "SIP PEER PROFILE" options.

Any help?
thanks

2

Mitel MiVoice Business/MCD/3300 / Call Me Back Issue (sent by Voicemail

« on: April 30, 2010, 03:16:31 PM »

Hi all!

I'm having this issue for a long time ago. The thing is:

Sometimes and JUST sometimes (I can not repeat it randomly) a few extensions receive a Call Me Back Message send from Hunt Group 15.

15 is the Hunt Group Number for calling to Voicemail. (15 was assigned for four voicemail ports).

I think is maybe a CoS thing, but I'm not sure.

Any idea?

Thanks a lot!

3

Mitel MiVoice Business/MCD/3300 / SIP Trunk - I wanna see the trunk name.

« on: October 15, 2009, 04:06:57 PM »

Hi all.

I have configurated a SIP trunk with some ISP. I have set two ports to this trunk also and these ports are used for attendant. I use the SIP PEER PROFILE BY INCOMING DID too (using "System Speed Call Asignment"). So, depending of the incoming number, it will go to ports (Attendant) or directly to extensions.

The thing is:

I wanna see the trunk's name on my Mitel display.

How can I do that?

- If I set "PRIVATE SIP TRUNK" I can see the name... but the attendant stops work. I mean, I dont hear the attendant voice, I hear the voicemail operator voice: "Please enter you VM number"...

PLEASE!! How can I see the trunk name!!!???

4

Mitel MiVoice Business/MCD/3300 / Greeting Sip Trunk trough [SOLVED]

« on: September 14, 2009, 01:31:14 PM »

Hi all.

I set a greeting in one port. I set this port as a destination from sip trunk, but when I get in trough sip trunk, i can hear teh operator: "please dial your voicemail number..."

Why? why I cant hear the greeting?

thanks!

5

Mitel MiVoice Business/MCD/3300 / CallMe Back Messages

« on: May 29, 2009, 09:51:37 AM »

Hi all!

I have an issue with call me back messages.
When I leave a Voicemail, it create a call me back message. So, I have to delete the voicemail plus delete call me back message.

Why? I dont want the call me back message.

thanks!

6

Mitel MiVoice Business/MCD/3300 / Redirect calls from 0 (operator) to extension

« on: May 07, 2009, 12:07:44 PM »

Hi all!

Please! help me with this!

My PBX (Mitel 3300) have set two ports for attendant. "Thanks you for call... etc etc" if the caller doesn't dial any option, the call is redirect to VM 0 (operator).

This was working ok, but now, I want that when the caller wait and doesn't dial any option, they been redirect to some extension (by example: 200)

So, what I want is: If the caller doesn't dial any choice, the voice of the PBX say: "You will be transfered to Operator" and that extension 200 rings.

How I do that?

0 is the default VM of the PBX.

Thanks in advance

7

Mitel MiVoice Business/MCD/3300 / Set phone 5201

« on: May 05, 2009, 09:50:04 AM »

Hi all!

I have this old telephone but I don't know haw to set the ip address...

anyone knows?

thanks!

8

Mitel MiVoice Business/MCD/3300 / Interconnect restriction trough Sip trunk

« on: April 28, 2009, 10:08:51 AM »

Hi all!

Anyone knows how can I set the Interconnect restrictions and Intercept handling??

I wanna restrict the incoming calls trough SIP Trunk but only for a few extensions.

Example:

call ----> SIP trunk ----> IVR (...if you know the extension number, please dial it now...) ----> 300 ----> OK (300 is a valid option)

call ----> SIP trunk ----> IVR (...if you know the extension number, please dial it now...) ----> 200 ----> WRONG! (200 is not a valid option, so the prompt sounds again..)

Am I clear?

thanks all in advance!

9

Mitel MiVoice Business/MCD/3300 / Can't pick call

« on: April 17, 2009, 10:57:57 AM »

Hi all!

I can't pick a call from only one extension. When i try, I get 0 in my display.

All of the rest of the extensions work just fine.

The configuration of this extension is the same that the rest.

I don't understand.

Thanks in advance

10

Mitel MiVoice Business/MCD/3300 / WARNING! Bug on Mitel ICP-3300..

« on: October 01, 2008, 04:37:21 PM »

I really don't know guys if you haven tried this, but believe me ...

If you define a SIP trunk with ANY PBX (I mean, 3CX, Asterisk, even a Cisco router), you will can to call to ICP-3300 without troubles...

All this, without define a SIP trunk on the Mitel... you just have to define it on the PBX that you wanna make the call...

Have you even try this?

AH! I have tried it on Mitel 3300 Rls. 7.1...

Saludos!

11

Mitel MiVoice Business/MCD/3300 / Greetings Question! Not an Issues...

« on: October 01, 2008, 12:48:51 PM »

Hi all!

I need to change the greetings on my ICP-3300...

In the "System Audio Files Update" form I can change the "Auto Attendant Greeting". So I can select Primary or Alternate 2.. 3.. etc...
If I want to change the greeting, I should know what saying each one....

The question is:

How can I listen (or downloading) the audio files for to know what they are saying???

Thanks in advance!

12

Mitel MiVoice Business/MCD/3300 / Speed Call Problems

« on: June 20, 2008, 04:12:05 PM »

Hi everybody!

I'am configurating a PBX Mitel ICP 3300.
And I've some problems with Speed Calls features.

I define the Speed Call with a Pause, but when I invoke this, the Pause and the following digits are lost. Some days ago, this was not happening...

Example:
*27 + 945673232 + P + 110 (Internal)
(
*27 = Code for store the Speed Call.
110 = Is the internal number who I want to call.
)

When I invoke this Speed Call (with *25), display show the full path. And one second later, the "P + 110" just disapear...

I don't know what else do...
THIS FEATURES WAS WORKING FINE TWO DAYS AGO... I DONT UNDERSTAND

Any Idea???
Thanks!