Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: ralph on April 02, 2012, 08:44:21 AM

Title: How to clear Mitel 3300 Security Alarm
Post by: ralph on April 02, 2012, 08:44:21 AM

Once a security alarm is triggered, how do you go about clearing it?
Couldn't find it in the help files?

Ralph

Title: Re: How to clear Mitel 3300 Security Alarm
Post by: martyn on April 02, 2012, 06:50:25 PM

Not sure!

What does the alarm entry actually say?

Title: Re: How to clear Mitel 3300 Security Alarm
Post by: ralph on April 02, 2012, 08:46:08 PM

"Security Alarm"

Ralph

Title: Re: How to clear Mitel 3300 Security Alarm
Post by: martyn on April 02, 2012, 08:48:32 PM

From the help file:  :)

Quote

A user has made three failed attempts to access the system through port 23 or a DISA trunk using an invalid username. Each time login fails, the user is locked out for 15 minutes and the event is recorded in the maintenance log. On the third failed login attempt, the alarm is generated.

Note: The alarm is generated by an invalid username. Attempting to log in with a valid username and an invalid password does not generate the alarm. Displaying the alarm by entering the Show Fault Security maintenance command is sufficient to clear it.

Title: Re: How to clear Mitel 3300 Security Alarm
Post by: ralph on April 02, 2012, 09:16:16 PM

Thanks martyn,
I couldn't find it in the help files.

Ralph

Title: Re: How to clear Mitel 3300 Security Alarm
Post by: kirkaldy on November 16, 2012, 07:13:55 AM

Go to the Maintenance Command and put in Show Faults Security
This should clear it.