Mitel Forums - The Unofficial Source

Mitel Forums => MiVoice Office 250/Mitel 5000 => Topic started by: lrzuniga on January 21, 2015, 10:13:04 AM

Title: Mitel 5320e IP Phone - Web Configuration
Post by: lrzuniga on January 21, 2015, 10:13:04 AM

Hi all,

I have a Mitel 5320e IP Phone set and I'd like to configure it via the web interface.

However, it doesn't respond unless I switch it from Minet phone mode to SIP. If I set the phone to SIP the phone can't dial out and I get "No Proxy Configured" error on the set. In Minet phone mode I can dial out without any error, but no web configuration at the network IP (?)

Disclaimer, I am very new to the PBX world so if there is a manual somewhere that I can reference, please feel free to point me that way.  ;)

So, any help is appreciated!

Thanks

Luis

Title: Re: Mitel 5320e IP Phone - Web Configuration
Post by: lrzuniga on January 21, 2015, 10:14:54 AM

Forgot to mention that when I put the phone in SIP mode and try the IP in a browser, it does respond, but the default login/password (as per the mitel docs -> http://edocs.mitel.com/UG/EN/5320_SIP_UG_en_CA_6.0.pdf) don't work.

Title: Re: Mitel 5320e IP Phone - Web Configuration
Post by: lrzuniga on January 21, 2015, 10:40:02 AM

Ok, I'm in.

The phone is in SIP mode
and the default login/pass were admin/5320e

Title: Re: Mitel 5320e IP Phone - Web Configuration
Post by: lrzuniga on January 21, 2015, 01:31:26 PM

Ok, figured it all out

went with Minet and not SIP

the phone wasn't working as it was already registered in the communications director under someone else (never de-provisioned) so the MAC address was in use.

I removed the entry and moved the MAC to the new user/device along with the settings for speed dial keys, etc. and up the phone came!

The pbx stuff is kinda fun.