Mitel Forums - The Unofficial Source

Mitel Forums => Mitel SX200, SX2000, and older SX platforms => Topic started by: solidtechnw on August 22, 2014, 01:08:21 PM

Title: Moving PRI from Century link T1 to Adtran 924e
Post by: solidtechnw on August 22, 2014, 01:08:21 PM

We are a pure VoIP provider of Cisco typically, and are managing a project to move our clients Mitel SX 200 ICP over from the current carrier to a new Fiber line via the Adtran 924e. We have some questions prior to the porting of the Trunk. So here they are: Thanks in advance for anyone with information.

constraints: We will be upgrading in Fiscal year 15 to a new Mitel, however we must port to the Mitel SX 200 ICP.

Current configuration: Currently the Mitel SX 200 ICP PRI is connected to the Century Link T1 CSU/DSU.

Porting changes upcoming: Moving to Adtran 924e and 250MB/250MB Fiber.

Questions: Besides the line needing to be seen as PRI are there any other configuration changes?

thanks in advance,

Karl Solid

Title: Re: Moving PRI from Century link T1 to Adtran 924e
Post by: johnp on August 22, 2014, 02:48:18 PM

As long as the protocol and did digit length is the same, it would be plug and play.