Recent Posts

1

MiVoice Office 250/Mitel 5000 / 6940w phones with phone manager

« Last post by thenewguy on Today at 01:34:34 PM »

Has anyone used a 6940W phone with the 250 and it work.  I am getting to the send pin stage but nothing will happen.  Install a 6940 phone and it will come up and function? 

2

MiVoice Office 250/Mitel 5000 / Re: Mitel 250 remote worker limit

« Last post by acejavelin on Today at 09:53:49 AM »

Whatever their Internet can handle... 0-250 phones...

3

Mitel MiVoice Business/MCD/3300 / Re: 6940 bluetooth

« Last post by lundah on Today at 09:40:34 AM »

Best you can do from the phone is forget the device which will un-pair it. But it will keep showing as available until you remove/turn off the device.

4

Mitel MiVoice Business/MCD/3300 / Re: 6940 bluetooth

« Last post by mgreen1417 on Today at 09:03:10 AM »

It shows up as available device but a some point I think she paired with it. We cant find the device to turn off its pairing.

Thanks for the reply
m green

5

MiVoice Office 250/Mitel 5000 / Re: Mivoice 250 Auto Attendant

« Last post by Spztc1 on Yesterday at 04:12:51 PM »

Hi again Jeff!

Thank you again for your post.  I was able to look in the right direct and find what I needed.

I added the Shot Pause in 3 times after my recording and this seems to have resolved the issue!

Your post was very helpful!

6

MiVoice Office 250/Mitel 5000 / Re: Mivoice 250 Auto Attendant

« Last post by Spztc1 on Yesterday at 03:52:05 PM »

Hi Jeff!

Thank you!  Help is much appreciated!  We do the same thing with the Hunt Groups.  We setup Extension list so instead of the calls hunting for a open extension it rings them all at one time.
This group extensions is what I have for my prompt.  So when someone calls and presses #3 all the phones in that group will ring.

Yes, our calls are routing to a CRA.  This does seem to be a timing issue.  If I call in and don't listen to the prompts and just select the department number I am trying to reach, it will work.
If I listen to the prompts play out, by the time it reaches prompt #3 and I select it, the recording repeats and I have to press the number again and when it rings to the department only one extension in the group is ringing. Very odd.

What timers should I be looking at/for?

Thank you!

7

MiVoice Office 250/Mitel 5000 / Re: MOH Port playing over Phone Speakers when Not in use. (turn Off?)

« Last post by subdivisions on Yesterday at 11:46:24 AM »

Nevermind.. Feature Code 313.  Google is my friend. 

8

MiVoice Office 250/Mitel 5000 / MOH Port playing over Phone Speakers when Not in use. (turn Off?)

« Last post by subdivisions on Yesterday at 11:30:31 AM »

Hi everyone once again.. Question.  We never setup Music on hold.. i am playing with it now.. We just want to say take an internet radio stream and plug it in for MOH etc.  When i did that, the phones not in use starting playing the Stream over the speakers..  Where do i go to turn that off so that the MOH Port is only played when on Hold or during transfers?  I see it in the CO trunk Groups "Audio on...) some are set to Music-On-Hold. some MOH Port.   What is the best configuration?

Thanks.

9

MiVoice Office 250/Mitel 5000 / Mitel 250 remote worker limit

« Last post by Tripoth on Yesterday at 10:49:02 AM »

Does anyone know the limit for remote works on the 250?

Client is looking to add to the sales force and would like them to have physical phones at their home offices.

10

MiVoice Office 250/Mitel 5000 / Re: Mitel says IP Networking license (840.0224) is no longer available??????????????

« Last post by acejavelin on May 13, 2024, 08:20:27 PM »

Wasn't end of sale for licenses June 2022?

Licenses cannot be transferred between different vendors... I am not sure Mitel AMC will move ANY MiVO 250 licenses other then between nodes in the same customer group. If you buy a "retired" system, technically you don't get the license that is associated with it as it is tied to the previous system owner or vendor of record, you don't get to "buy" it, used hardware is exactly that, hardware only.