Messages

1

Mitel MiVoice Business/MCD/3300 / Re: Help migrating dhcp to 2008 server

« on: June 12, 2012, 09:50:27 AM »

10.1.37.0 data
10.1.38.0 Voice
Old dhcp 10.1.37.1 new dhcp server 10.1.37.6

Switch has vlan 1 voice

and vlan 2 voip


ok so i have edited the dhcp-server command on the switch to point to the correct  dhcp server but phones still refuse to pick up an ip from the server and dont show in the address leases drop down in dhcp.
in the dhcp scope 10.1.38.0  i have the following
128 mitel tftp server = 10.1.38.1
129 mitel rtc card adress =10.1.38.1
130 mitel ip phone =ident mitel ip phone
132 mitel vlan id = 0x2
133 mitel priority = 0x6


anything im missing??


if i turn the old DHCP server back on phones pickup ip straight away.

2

Mitel MiVoice Business/MCD/3300 / Re: Help migrating dhcp to 2008 server

« on: June 07, 2012, 08:52:34 AM »

thought as much.trouble is the 3com 4500 switches were put in prior to my involvement and no one on site has any idea what the password for them is.

We have put a cisco POE Switch in which i can get in to  to change....

3

Mitel MiVoice Business/MCD/3300 / Re: Help migrating dhcp to 2008 server

« on: June 02, 2012, 05:52:47 PM »

No I haven updated anything on the switches. 3x 3com 4500
Could this be why???

4

Mitel MiVoice Business/MCD/3300 / Re: Help migrating dhcp to 2008 server

« on: June 02, 2012, 05:09:04 PM »

hey thanks tried to run it but get couple of erors

netsh not configured for dhcp and dyanamic update must be run in the same path or something

tried runing win system32 but same errorr?

5

Mitel MiVoice Business/MCD/3300 / Help migrating dhcp to 2008 server

« on: June 02, 2012, 02:58:47 AM »

Hi
I'm currently trying to migrate the dhcp role from a 2003 Sbs box to a 2008 standard box.
all dhcp is handled by the server with two scopes 10.1.37.0 and 10.1.38.0 for voice.

I have migrated the dhcp to the new server.the pcs are plugged into the back of the phones and are getting an ip from the correct scope and the leases are showing in dhcp.

However when I check the other scope there are no leases for the 10.1.38.0 scope???
The new dhcp server is on a different ip to the old one
Any ideas???

Mx3300 with 3 stacked 3 com 4500 switches.