Topics

1

MiVoice Office 250/Mitel 5000 / Mitel 5000 in Australia

« on: May 20, 2017, 07:50:03 AM »

Hi

Is anyone here from Australia please ?
I`m going to install a Mitel 5000 in Ausi and wants to know some details.

1.Would a 5000 CS/HX work over there
2.Would the on board Analog ports work with the lines
3.Would a T1/E1, BRM cards work with the digital lines over there

I will be setting the system up in the UK.

Thanks in advance.

2

Mitel MiVoice Business/MCD/3300 / Need help forwarding multiple DDI`s to 1 VM Box at Night

« on: March 02, 2017, 12:41:29 PM »

I have 3 separate DDI`s pointed to 3 different name tag hunt groups.
I need these 3 DDI`s forwarding calls to 1 mailbox at Night.
How can i set this up please.


Thank you in advance

3

Mitel MiVoice Business/MCD/3300 / Need help with Mitel OP27 codeless handsets (Not subscribed)

« on: August 05, 2016, 03:50:07 PM »

Hi
I have swapped a faulty op27 and a working op27`s mac address on the system to swap the Exts.
That did not swap the phones and it kept displaying not subscribed.
Then I`ve revert the mac addresses back to how it was hoping that it should work.
But still i`m getting the not subscribed message on the displays.
How can i get this working please.

Thanks


Thanks

4

Mitel MiVoice Business/MCD/3300 / Changing DHCP Scope

« on: March 17, 2014, 05:50:16 AM »

hi all

we are changing one of new customer`s DHCP scope and the phone system IP address. we normally allocate static IP`s.
could anyone please advice me how to go about this please.
 

5

MiVoice Office 250/Mitel 5000 / Mitel 5000 HX version 6.0 in Germany

« on: January 18, 2014, 07:42:43 AM »

Hi All
we have shipped a 5000 system to Germany and cant get the ISDN to work..
do i have to do any additional or different config to UK.
does anyone know about programming a ISDN 2 in Germany Please
we have the exact same setup like we do in the UK. I'm just wondering whether i need to anything different to that. For Ex Fixed 0 could be different that sort of a thing.
BTW i have tried Auto as well. It didn`t work.
we can see the BRM 2`s are online are online from the SAD tool. But when they try to dial out they get a busy tone after they press 9.
when we fire a call in there is a recording saying that all the lines are busy.