Mitel Forums - The Unofficial Source
Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: VinceWhirlwind on September 08, 2017, 03:52:06 AM
-
Should I gracefully shut down the controller to move it, or just pull the plug on it?
I have a strange feeling if I gracefully shut it down I have to do something special to bring it back up...?
-
Gracefully shut it down. Go to maintenance commands and type in shutdown (I think thats it) and wait for the mandatory 60 seconds; make sure the disc light is not flashing just in case and then pull the plug. Nothing special to do on restart.
Unless its a MXe server; thats done from the server manager although its just the same IIRC
-
Backup before ;D
-
I like the appShutdown 3 command from maint port, tells you when ready for power off and it is usually less than the 60 seconds.
-
I just shutdown (if I can see the switch and not doing it remotely) about 5-10 seconds after HD activity ends which is also usually less than a minute as well. You pays your money..... If I'm doing it remotely and someone else is pulling the plug then its after a minute.