Mitel Forums - The Unofficial Source

Mitel Forums => Aastra - MiVoice Office 400 and MiVoice MX-One => Topic started by: websinh on March 03, 2017, 09:56:19 AM

Title: Find and install DECT Mitel 622d firmware
Post by: websinh on March 03, 2017, 09:56:19 AM

Hi everyone,

I have a MiVoice 400 installation with about 50 Mitel 622d phones. I'm used to buy those DECT in a provider but they sell phone 2 times the price than on the standard market.
I have bought a new one on the market but I'm experiencing a new problem. The Version on my new phone is :
- Mitel: 6.1.SP34
- FW: 130.61.12
And my other phones are :
Rel : HS4.1
Appl. : 129.4.25

I can pair this device to my MyVoice 400 but the configuration is not updated (no phone book,...). Do I have to download and install the same fw as the other phones ? What Can I do force download the same FW than the other devices ?

Thanks a lot,

Yannick

Title: Re: Find and install DECT Mitel 622d firmware
Post by: zoo on March 04, 2017, 11:00:23 PM

Try this (from Mitel Technical Info):

When running on the integrated TDM DECT-System of MiVoice Office 400 new devices
Mitel 600 DECT Phones must be switched manually to the MiVoice 400 system software via
das local Menu „Switch to 129.004.022“:
1. Mitel 600 DECT Phone is switched on and SIP-DECT / OpenCom Software is running
2. Press the menu “>>>”-Key and enter ***76# to access the service menu.
3. choose “DOA settings” and choose „Switch to 129.004.022“confirm with “Yes”

Let us know if helps..

Zoran