Messages

31

Mitel MiVoice Business/MCD/3300 / Mitel Emergency Hotline Phone

« on: January 05, 2017, 10:54:13 AM »

Hi

I have a Emergency Hotline  Analog Phone which dials immediately on lifting, well almost there is quite a few seconds delay in picking and dialing.  I have already set the class of service call control timer to the lowest values on each but it still takes about 10 seconds.  During this time there is no noise so users could think nothing is happening which isn't any good as its a hotline to 999

Any suggestions

32

Mitel Software Applications / Re: Micollab and MBG DMZ

« on: December 13, 2016, 09:11:01 AM »

yes that what i thought i will give it a go

33

Mitel Software Applications / Micollab and MBG DMZ

« on: December 13, 2016, 04:58:00 AM »

Hi  I have a question about the setpu of Micollab with a MBG in a DMZ

Does the Micollab on the LAn need a MBG installed on it also or can it use our sole MBG in the DMZ?

34

Mitel MiVoice Business/MCD/3300 / Mitel 3300 password issues

« on: December 05, 2016, 02:48:14 PM »

Any quick way to reset a password on 3300 currently the one we setup doesnt work and it should anyone else come accross this issue

35

Mitel MiVoice Business/MCD/3300 / Call Forwarding buttons

« on: December 05, 2016, 05:42:52 AM »

Hi

Can you set more than one call forward button for call forward always a user defined one. i.e.

button 2 set to call forward always ######
button 3 set to call forward always ******

36

Mitel MiVoice Business/MCD/3300 / Re: Mitel 3300 Meet Me Conferencing

« on: November 24, 2016, 11:39:24 AM »

Just another question

The security of this is none exisitant.  We found that anyone can dial-in and setup a conference with a distinct pin and others can connect which could cause all of out lines to be used on say a BRI/PRI ISND2 setup.

There also isn't a direct way to see if this is occurring

Anyone know of a way to prevent this or harden the system against it

37

Mitel MiVoice Business/MCD/3300 / Re: Installing 6920 IP phones

« on: November 24, 2016, 11:36:47 AM »

FYI
DHCP Option 43 is needed for these phones to work option 125 isn't sufficient found good link to input it here

http://www.unixwiz.net/techtips/mitel-ipphone-networking.html

You can gain advanced options access before the phone is registered but as soon as register its disabled which is a bit of a pain if you need to change anything

38

Mitel MiVoice Business/MCD/3300 / Installing 6920 IP phones

« on: November 24, 2016, 10:16:10 AM »

Ok so exciting day

Got our first 6920 at work and plugged it in to the lan and up it comes but it gets all the way through then stops on contacting server 0.0.0.0

Bypassed the above by enterering static ip for call server but cant do that for full roleout

Also i cant administer it once its a locked device and when i login as hot desk user i cant access advanced settings

39

Mitel MiVoice Business/MCD/3300 / Re: Mitel 3300 Meet Me Conferencing

« on: November 22, 2016, 07:40:49 AM »

Got it working
Once i added the external number to the system access points form.

The details on how to configure it are a bit sketchy.

You dial the number either external or internal ext then enter your ext (to act as conference host) then the pin number 4 digit.  This activates the conference
Users dial in either external number or internal ext then enter your ext followed by # then pin same as you set followed by hash then they are put in conference
Very simple and quick and cost saving.

40

Mitel MiVoice Business/MCD/3300 / Mitel 3300 Meet Me Conferencing

« on: November 18, 2016, 08:52:38 AM »

Hi Has anyone set this up
I have entered an extension in the Meet Me Conf field in System Access points but next instruction says

Programming
To program Meet-Me Conference:
Complete Conference feature programming.
Enter the Meet-Me Conference Access Number in the System Access Points form.

Anyone have any experience in getting this to work

41

Mitel MiVoice Business/MCD/3300 / Re: Emergency Phone

« on: November 18, 2016, 04:43:44 AM »

Thanks would this work with analog set?

42

Mitel MiVoice Business/MCD/3300 / Re: Emergency Phone

« on: November 17, 2016, 11:45:30 AM »

Thanks, but how do i program it to dial the moment i pick up the receiver and would this work if i used a analog set

43

Mitel MiVoice Business/MCD/3300 / Emergency Phone

« on: November 17, 2016, 10:26:23 AM »

Hi
I have a customer who requires a Red emergency phone which will sit next to the alarm system and needs to dial out on pickup to the emergency services is this something easily setup on the Mitel and is there a place to get red no button ip phone which can be set to dial on pickup

44

Mitel MiVoice Business/MCD/3300 / MIVB 8.0 and new 6900 phones

« on: November 09, 2016, 07:23:23 AM »

Hi Just wondering if anyone has manage dot get hold of any of these yet i ordered one of each the moment they where released but my supplier Trust is telling me thye have no eta???

45

Mitel MiVoice Business/MCD/3300 / Re: CPN Substituion over BRI

« on: November 04, 2016, 08:26:42 AM »

Thanks did that and presto.

Thanks Again