Show Posts
1
SIP On Mitel / Setting up SIP, but first TFTP...
« on: August 05, 2016, 03:03:17 AM »
Hi Guys,
I've been reading through some of the threads here and you guys seem like a friendly bunch, so I would like to ask a hand.
I've gotten a hold of Mitel 5360 (Main: 3.0.2.5 Boot: 3.0.2.5) and put it into SIP mode after a factory reset.
I get the message "SIP not available. Install newer", which apparently means I need to update the firmware.
I tried setting a static address on the phone to my laptop running a TFTP server.
When I enter TFTP update mode, I get "L2&Boot Err."
I have looked this up and it looks like it's a DHCP error.
Can anyone suggest a solution or DHCP option I should be applying to get this phone booting in SIP mode?
Thanks in advanced!
I've been reading through some of the threads here and you guys seem like a friendly bunch, so I would like to ask a hand.
I've gotten a hold of Mitel 5360 (Main: 3.0.2.5 Boot: 3.0.2.5) and put it into SIP mode after a factory reset.
I get the message "SIP not available. Install newer", which apparently means I need to update the firmware.
I tried setting a static address on the phone to my laptop running a TFTP server.
When I enter TFTP update mode, I get "L2&Boot Err."
I have looked this up and it looks like it's a DHCP error.
Can anyone suggest a solution or DHCP option I should be applying to get this phone booting in SIP mode?
Thanks in advanced!