Messages

31

Mitel Software Applications / Re: Active directory integration W/ 3300+MiCollab

« on: May 28, 2021, 10:01:23 PM »

MIVB and Micollab Can Only READ from AD

normal setup is AD admin adjusts ad with iphone details and user role ,then the micollab and mivb read that data in

32

Mitel Software Applications / Re: Micollab and EHDU

« on: May 28, 2021, 10:00:12 PM »

not clear exactly what you are doing here
i will assume that you have an ACD micollab softphone
and you want to add an EHDA

- you need to add a new number to the user account as with the EHDU settings
I normally just do it in the MiVB =- add the EHDU as an ACD agent as well to the existing user
sync with MICC
user should then have 3 options when signing in
Deskphone Micollab softphone and EHDA( mobile)

33

Mitel Software Applications / Re: MiCC : report showing a list of calls with ANI ?

« on: May 28, 2021, 09:56:33 PM »

add an email on the transfer failure option and include variables regarding the call
<<ani>> <<DNIS>> etc
we quite often find that the emails are handy when trying to work out whats going wrong

34

Mitel Software Applications / Re: Error in MIVCR " MiSsl TunnelSendCertRequest returned error:MST_BAD_STATE"

« on: May 28, 2021, 09:54:25 PM »

is recording enabled on the MBG
are web services running on the MBG

35

Mitel Software Applications / Re: MiCollab ACD Hotdesk softphone

« on: May 28, 2021, 09:48:34 PM »

best method is to disable PIN sync on the Nupoint
- there is a console command for that
this will mean that any acd agents with nupoint mailbox can set that up without breaking the mivb side when teh password is changed

setup acd micollab softphone user with a pin
dont change it , if you change it you need to redeploy in teh deployment blade

36

Mitel Software Applications / Re: MIVCR getting error " waiting for extension association from SRC "

« on: May 28, 2021, 09:46:02 PM »

you must use direct mode for Micollab Softphone recording

37

Mitel MiVoice Business/MCD/3300 / Re: 69XX device resilient mode indicator?

« on: May 28, 2021, 08:45:31 AM »

there is a brief interruption to the network icon
- only means i have found is to load a branding file with different ( yellow) background

phone goes resilient - background changes
phone comes back - phone reverts to original branding with white background

38

Mitel Software Applications / Re: ACD silent monitor - MiCollab softphone

« on: March 16, 2021, 04:02:04 AM »

workaround didnt work for me

you can monitor a softphone from a deskphone but not the other way round
initiation of the monitor ( from softphone)seems to conenct but there is no audio

39

SIP On Mitel / Re: Mitel 5330 Stuck in DHCP

« on: November 14, 2020, 03:42:09 AM »

sounds like its in minet mode
 - no web interface for that and it wont boot properly unless it gets an option 125 and connects to a mcd.

power cycle it and hold down the grey blue button ( above red hold key)
then select config phone ( navigate using * & #)
go down to phone mode and select it
then change from minet to sip , when the phone reboots it should have a web interface you can access

40

Mitel Software Applications / Re: Next gen

« on: November 14, 2020, 03:29:18 AM »

get the customer to create an internal ssl cert for it using the domain CA
generate a csr and put the server name in the alternate name filed ( will create a cert with the name listed twice)

then install the domain ca cert into the certificate authority trust
once thats done the internally created cert should install

41

Mitel MiVoice Business/MCD/3300 / Re: callback request possible to disable this on mitel 3300 controller?

« on: April 26, 2020, 05:39:04 AM »

Best you can do is to set this to yes for all devices in the cos
- this stops the message that enables users to setup the callback

Disable Send Message
 
Select"Yes" to restrict IP telephones from sending Call MeBack messages. The "Leave a Msg" soft prompt is notdisplayed and/or the message LED on the set initiating the calldoes not flash; this informs the user that Call Me Back messagesare disabled.
 

 

42

Mitel MiVoice Business/MCD/3300 / Re: MiVoice Business 10.0 to come with Call Director?

« on: April 05, 2020, 05:11:19 AM »

Yep it sure is cos they cant make it work in a container

Pretty sure nupoint is to be discontinued

43

Mitel Software Applications / Re: Selecting Ringing Lines on MiCollab Softphone

« on: March 15, 2020, 06:25:24 AM »

they cant
thats the limitation of using softphones
i think the ring group name is being added to the next MIVB release (9.1)
to allow it to be displayed for Softphone users
- you would have to send calls to a ring group and make the softphone a native member so that they can see the ring group name when its ringing

at the moment i don't believe there is anything you can do

44

Mitel MiVoice Business/MCD/3300 / Re: MOH on radio station

« on: March 14, 2020, 11:47:42 PM »

yes its possible
Physical controllers have a 3.5 mm jack
as for the legality - they should be paying royalties as its considered a broadcast
in Australia this is controlled by ACMA

With virtual pabx you can now use a sip endpoint to allow the connection to a physical device

45

Mitel MiVoice Business/MCD/3300 / Re: MiVoice Business 10.0 to come with Call Director?

« on: March 14, 2020, 11:44:38 PM »

yes this is true

Mitel are working to containerise all voice servers so they are platform independant
They had a problem with Nupoint so it will be removed from micollab and the Evmail's capabilities improved to allow it to take the place of nupoint