Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - TYTEL

Pages: [1] 2
1
MiVoice Office 250/Mitel 5000 / mitel hx 5000 10 digit local dialing
« on: May 25, 2018, 11:53:05 AM »
I have a mitel hx 5000 and when dialing option 2 from vm to do a return call dials a 1 before dialing the 10 digit local number and gets a recording from the CO saying you do not have to dial a 1 before dialing a local number.
pct

2
MiVoice Office 250/Mitel 5000 / inter tel 5000 (cabinet Display)
« on: August 20, 2017, 02:43:12 PM »
Is there a way to have the display in an (interel 5200 cabinet) to lightup.
Everything works in the display but does not light up.
thanks
pct

3
MiVoice Office 250/Mitel 5000 / inter tel 5000 DEI
« on: August 09, 2017, 03:16:32 PM »
I have a intertel 5000 2.2 SW that will not come on line,during reboot I get a DEI ok in the display.
The power light on the DEI is on but the light on the DIE and the 16 port station flash busy.The 5000 server comes up and works along with the voicemail as the A/A will answer calls and route calls to vm boxes.I have tried the DEI on another 5000 cabinet server and same results.From what I can tell there is a problem with the DEI and the 5000 server cabinet both.
Thanks
pct

4
MiVoice Office 250/Mitel 5000 / Inter tel 5000
« on: April 11, 2017, 01:39:41 PM »
Inter tel 5000 with major alarm and DSP failure in server display?
2.2 SW.
Thanks
pct

5
MiVoice Office 250/Mitel 5000 / 3.2 console software installed on inter tel axxess 7.0
« on: March 04, 2017, 08:38:22 AM »
I have been trying to get Mitel 3.2 console software to work on intertel axxess with 7.0 software.The console works great on my inter tel 5000 with 2.2 software.I have premium features programmed for OIA events & OIA third party control with serial port programmed for OIA on the axxess system.
Can not get phone system to connect with computer with the console software.Have wired serial port with pin outs from inter tel 7.0 install manual.
Have a transceiver to convert the RS 232 output to TCP/IP for network connection to console computer.
Am I missing something?
Thanks
pct

6
MiVoice Office 250/Mitel 5000 / mitel console software
« on: January 31, 2017, 12:22:20 PM »
I have the atandant console and software on a cd along with the usb software dongle.In trying to install the CT gateway/Apps and switch transceiver it
keeps telling me that the 827.9129 dongle hasp key is not detected.
When I look in device manager the hasp key shows that it is installed and working.
Help
Thanks
pct

7
MiVoice Office 250/Mitel 5000 / Intetel 5200 voice back up
« on: December 12, 2016, 09:00:39 AM »
What is the procedure for backing up the BVM data using an USB drive as the target backup.
I have a inter tel 5200 system in reading the help info on Voicemail backup and restore it seems to be a straight forward process but I must be missing something.
Thanks
pct

8
MiVoice Office 250/Mitel 5000 / Software license file
« on: September 20, 2016, 08:14:07 AM »
Is there anyway to retrieve the license file from a working Mitel hx 5000 so it can be downloaded if the system loses it's license?
Thanks
pct

9
MiVoice Office 250/Mitel 5000 / 580.1000 intertel 5000
« on: September 08, 2016, 09:09:07 AM »
I have an inter tel 5000 with 2.2 sw with license the 580.1000 communications server has a bad mother board.Is there a way I can use the license on another communications server?
Thanks
pct

10
MiVoice Office 250/Mitel 5000 / How Many Phantom Extensions On Mitel hX 5000
« on: September 01, 2016, 11:42:52 AM »
How many phantom extensions can I have on the mitel hx 50000 with (1) node?
Thanks
pct

11
MiVoice Office 250/Mitel 5000 / SW upgrade from 2.2 to 2.4
« on: July 26, 2016, 02:56:22 PM »
I have a license for inter tel 5000 which is 2.2 SW can I upgrade to 2.4 SW and have no license issues?
Thanks
pct

12
MiVoice Office 250/Mitel 5000 / hunt groups
« on: May 05, 2016, 02:19:38 PM »
I have a mITEL hx 5000 with 3 hunt groups and trying to get the first hunt group to ring when the call moves to the 2nd hunt group and third hunt group.
Tried using hunt group list with first hunt group list is each hunt group, so what needs to happen is for the first hunt group to keep ringing until the call is answered as it moves to second and third hunt group.
Thanks for any help.
pct

13
MiVoice Office 250/Mitel 5000 / intertel 5000 2.3 SW
« on: April 07, 2016, 03:07:41 PM »
Have an intertel 5000 been in and working for the last year and is displaying a software reset in the admin phone.
Is this something I can clear or do I need to reload the system software?
Thanks
pct

14
MiVoice Office 250/Mitel 5000 / mitel mini voice db programming
« on: March 06, 2016, 09:42:15 AM »
I have 6.1 programming sw on my laptop and when I try to install 6.0 programming sw the installer tells me I have to uninstall 6.1 before installing 6.0.
HELP
Thanks
pct

15
MiVoice Office 250/Mitel 5000 / intertel 5000
« on: November 05, 2015, 08:11:24 AM »
I have an inter tel 5000 ver 2.2 and need 2 phones to ring together at the same time and then using call routing application time out to 2500.
I have tried using a hunt group but it only rings one endpoint then moves to the next endpoint in the hunt group.
Thanks
pct

Pages: [1] 2