Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - gurei

Pages: [1]
1
Hi all.
We have MIVO400 SMBC which was working fine with 69xx SIP phones on a network that had PCs and phones on the same subnet. Recently we separated subnets and created a second one for the phones and a voice VLAN.
We are using Cisco switches and configured the voice VLAN on all access switchports. The phones must get DHCP from the SMBC. PCs connect to the back of the phones and get DHCP from Fortinet Firewall. When connected to the network the phones are not getting the voice VLAN ID and fail to get IP addresses (If I test with a phone on MINET it gets the voice VLAN ID). They get stuck on "20% DHCP: Waiting for IP". What configuration must I do on the Fortinet to enable the phones to get the voice VLAN ID and make the request DHCP from SMBC?
Please advise.

2
Mitel MiVoice Business/MCD/3300 / Re: ACD Path interflow Dialing list
« on: March 31, 2019, 04:00:50 AM »
How was the 2 seconds MOH resolved?

3
Mitel MiVoice Business/MCD/3300 / Analog trunks to E1 device?
« on: July 31, 2011, 01:02:18 PM »
Hie to you all.
Have a client with a 200 analog trunks & is interested in getting an MXe & having 400 analog stations.The problem is that we are in a part of the world were ISDN PRI is not available so we have to make use of the analog.
Now buying 25 ASUIIs with 4+12 cards just to connect the trunks is not our best option as the cards will use up slots we need to use for 24ONS to connect stations .
We will end up requiring a lot of ASUIIs making the installation very huge & demanding more Mxe controllers.Does anyone know of a device that we can connect all our analog trunks to then get an E1 output from it to connect to E1  ports on the Mxe?
Thank you

Pages: [1]