Messages

181

Mitel MiVoice Business/MCD/3300 / 2 extensions to 1 embedded voicemail box on 3300 7.1?

« on: June 26, 2015, 06:18:49 PM »

Is there a way to have 2 extensions go to one voicemail box on 3300 embedded voicemail? Thanks in advance

182

Mitel MiVoice Business/MCD/3300 / 3300 Shell Command to see voicemail forwarding SMTP error messages?

« on: June 11, 2015, 05:03:08 PM »

Anyone know what the shell command is to see the Voicemail forwarding SMTP error messages on 3300 embedded voicemail.  I tried (iPVM_SMTPClientMsg)...didn't work.  Any help appreciated

183

Mitel MiVoice Business/MCD/3300 / Re: 3300 7.1 RingGroup overflow to embedded voicemail box?

« on: June 11, 2015, 04:56:42 PM »

MitelUK2010.......I created a 3123 single line phantom key on a phone.....created an extension voicemail box 3123....created RingGroup *3123 with the overflow to voicemail huntgroup pilot #.  Addeded MWI keys for 3123 to 3 phones.  works great

184

Mitel MiVoice Business/MCD/3300 / Voicemail to Email on Embedded 3300 7.1 with gmail?

« on: June 11, 2015, 09:28:00 AM »

I have a customer that would like voicemail to email on there 3300 embedded voicemail.  However they are using a government gmail cloud accounts.  Any way to get this to work since don't have a SMTP server that I can relay the messages to?  Any help is appreciated!!

185

Mitel MiVoice Business/MCD/3300 / Re: 3300 7.1 RingGroup overflow to embedded voicemail box?

« on: June 11, 2015, 09:20:11 AM »

I did it exactly like Dan mentioned and it works great!!  MWI key works on multiple phones too.  Thanks a bunch Dan!!

186

Mitel MiVoice Business/MCD/3300 / 3300 7.1 RingGroup overflow to embedded voicemail box?

« on: June 09, 2015, 05:30:40 PM »

Is there any way to get a Ring Group to overflow to embedded voicemail box (3123).  my 3300 is at Mivoice 7.1 I have tried everything I know to do but all it does is time out and go to Auto Attendant.  I have tried setting up a *3123 hunt group which goes to 3123 voicemail message but still no luck.  Any help appreciated!!

187

Mitel MiVoice Business/MCD/3300 / Re: No Hold and Transfer when connecting to Audiocodes

« on: May 29, 2015, 08:27:25 AM »

Got it fixed!!  In the Audiocodes -Tel Profile- Enable Polarity Reversal- Should be "DISABLED"

188

Mitel MiVoice Business/MCD/3300 / No Hold and Transfer when connecting to Audiocodes

« on: May 26, 2015, 01:28:36 PM »

I have 3300 Mivoice 7.0 MXe connected to analog trunks via Audiocodes MP-114 FXO.  I can receive inbound calls to the 3300 through the Audiocodes...I can put call on hold and transfer when call comes in to 3300.  However when I place a call outbound through Audiocodes I can't put the call on hold or transfer.  I have the SDP option "Avoid signaling hold to peer"  set to yes.  Just wondered if I have missed something or maybe call HOLD and Transfer isn't compatible on outbound calls with Audiocodes.  Any help appreciated

189

Mitel MiVoice Business/MCD/3300 / Re: Help Cisco phones on 3300 MCD 7.1

« on: April 28, 2015, 05:10:41 PM »

Just thought I would pass it along. Message Waiting Indicator will not work between Mitel and Cisco phones....per Mitel

190

Mitel MiVoice Business/MCD/3300 / Help Cisco phones on 3300 MCD 7.1

« on: April 28, 2015, 09:40:23 AM »

Does anyone have a how to guide from Mitel about installing Cisco phones on 3300 or have experience with installing them.  Just a few things I need help with.  I have a Cisco CP-6921 which is a 2 line phone.  I have the firmware upgraded to Sip and the SEPmac config file loaded.  The phone works great with one button... however I am trying to register 2 lines on the phone, first I tried registering the same extension twice and I get the following message on the phone...Unable to create call; Maximum number of calls for this line have been reached...so I tried to register another extension number on button 2 and get the same message.  Just wondered if it may be the way I set up the SEPmac file.  Also the MWI will not work.  I have the MessageWaitingLampPolicy set to 1 which I believe is light the lamp and give prompt on display.  I have a Aastra phone registered on same extension (not plugged up at same time and the MWI works...just to show the light is coming through to registered phone.  Any help greatly appreciated