Mitel Forums - The Unofficial Source
Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: pakman on May 11, 2017, 12:00:18 PM
-
Is there a way to enable caller ID on a Soundstation programmed as a analog set?
Thanks,
-
Yes, but I just can't remember how at the moment.
I believe you'll need to modify the ONS/OPS circ descriptor.
Ralph
-
I think you will find your answer in the Online Help or here: http://mitelforums.com/forum/index.php?topic=1592.0
-
acejavelin,
I saw that post and went through those step with no luck. maybe I missed something and will go back over it and report back.
Thanks,
-
acejavelin,
I saw that post and went through those step with no luck. maybe I missed something and will go back over it and report back.
Thanks,
I am pretty sure there is something you turn on in ONS Circuit Descriptors too, but I am out of the office a couple weeks and don't have easy access to a system with analog ports at the moment.
-
If you think of it when you get back let me know. I went over that post again and didn't work. I went through the ONS Circuit Descriptors and didn't find anything that talked about caller ID.
Thanks,
-
Do you have ONS Class Set enable in the COS?