Mitel Forums - The Unofficial Source
Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: acejavelin on April 27, 2016, 09:18:29 AM
-
I am doing my first hospitality install of a MiVoice Business AX controller, pretty simple one, about 10 IP phones, a 5540 console, 145 analog room extensions, and embedded VM... Just curious how the best way to do this is, the help section makes it appear pretty simple but there isn't a lot of details.
I have built the analog room extensions and added them to the Guest Rooms form, but do I need to make Users in Users and Services as well? All rooms have DID's so would this be easier to manage if I did? This is a standalone system, and there doesn't seem to be a real need to make users.
There is no PMS system we are interfacing to so they are going to use the console to handle room functions, but I can't seem to get the Guest key to show up on the console after going through the programming steps.
I am very familiar with setting up 200ICP's in hospitality, done literally hundreds over the years, but the 3300 seems really limited in some of the hospitality features.
-
FWIW, I went ahead and built users.
The Guest Services key had to be programmed on a firm key on the console but pressing Function - Att Function [F2] - Firmkeys [F8] and then pressing one of the "blank" firm keys on the console repeatedly until it displayed "Guest Serv", then Save [F0]
Now if I could just find a quick way to check in a guest in the voicemail...