Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: johnlowe on January 26, 2015, 09:23:12 PM

Title: 3300 paging zones
Post by: johnlowe on January 26, 2015, 09:23:12 PM

Hello,

I would like to create few paging zones since we have loudspeaker, how do I program paging zones in the PBX?
Once paging zones is setup, how do I set location A for zone 1, location B for zone 2 and location C for zone 3? Is this setup in paging amplifier?


Thank you
 

Title: Re: 3300 paging zones
Post by: mszodiac on January 27, 2015, 12:21:04 PM

How many amplifiers do you have?

The way we've set it up is one amplifier to one paging unit.  The amplifiers themselves are installed on certain locations on the premises (ie. public zone).  Then we just setup paging access codes to whichever phone requires paging services.

Title: Re: 3300 paging zones
Post by: johnlowe on January 27, 2015, 06:44:31 PM

Just one amplifier.
Can one amplifier have multiple zones?

Title: Re: 3300 paging zones
Post by: mszodiac on January 28, 2015, 08:38:34 AM

The docs show one paging unit can be setup with multiple zones but we could not get ours to work as such...