Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: knoxs2011 on November 12, 2011, 12:01:11 PM

Title: HOW TO CONFIGURE TWO 3300´S USING SIP TRUNK
Post by: knoxs2011 on November 12, 2011, 12:01:11 PM

HI, I have two 3300´s, they have loaded SIp trunk each one, but when I try to configure the Sip Peer assigment, appears a message "value out of bound", Every Mitel has 2 SIP trunk licenses, so I place 2 maximall call between they in the profile but nothing apperas to work.
can you writeme the steps to configure this right please.
Note. the client don want propietary licences, so I don use the IP trunks in this case.

thanks for your help.

Title: Re: HOW TO CONFIGURE TWO 3300´S USING SIP TRUNK
Post by: ralph on November 12, 2011, 08:59:19 PM

I just did this in our lab a couple of weeks ago.
Pretty simple.   Unfortunately I won't be near our office until Monday. 
I'll publish the Peer Profile then for you.
Until then, just try using the defaults.  If I remember correctly, that's what worked for m.

Ralph

Title: Re: HOW TO CONFIGURE TWO 3300´S USING SIP TRUNK
Post by: ralph on November 14, 2011, 07:57:13 AM

I've attached a working SIP Peer Profile that I've used for testing in my lab.

Ralph

Title: Re: HOW TO CONFIGURE TWO 3300´S USING SIP TRUNK
Post by: knoxs2011 on November 14, 2011, 03:12:05 PM

thanks Ralph by my demo equipment is in use now, and I dont have where to load the file; can you please send me print screem images for the configuration?
thanks

Title: Re: HOW TO CONFIGURE TWO 3300´S USING SIP TRUNK
Post by: knoxs2011 on November 18, 2011, 11:17:44 AM

Ralph I ytry to load the archieve to a demo equipment but it doesnt work can you please load the print screem images for the Sip Peer profile?

Title: Re: HOW TO CONFIGURE TWO 3300´S USING SIP TRUNK
Post by: ralph on November 18, 2011, 11:24:36 AM

I've attached a PSR recording.

Ralph

Title: Re: HOW TO CONFIGURE TWO 3300´S USING SIP TRUNK
Post by: knoxs2011 on November 18, 2011, 05:10:53 PM

well ralph continuing th eoperation, I try to load the configuration shared in the Zip archieve, buet something happen, appears a windows with a message "value out of bound" I place the Ip adrees name the Sip peer profile, comfig a trunk service, and there fore, but allway appears that message, I'm turning crazy, the equipment (both) are in the 9.0 version tey are 3300 MX both.

I dont understand wy thi configuration dont letme create the SIp Peer Profile, what can I do?

Title: Re: HOW TO CONFIGURE TWO 3300´S USING SIP TRUNK
Post by: knoxs2011 on November 28, 2011, 12:14:16 PM

Hy every body.
well my mistake was on the Network element assigment, when I place the type I assign 3300 ICP but i forgot that in this case its a SIP peering connection so I change it for Another, and began to work properlly.

thank of ryoyr collaboration my friend.

Title: Re: HOW TO CONFIGURE TWO 3300´S USING SIP TRUNK
Post by: Timothy on December 18, 2013, 03:35:50 PM

Has anyone done this through Mitel Border Gateways between two sites across the Internet?