Mitel Forums - The Unofficial Source
Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: BlackSunshine on June 17, 2016, 05:00:09 PM
-
I am planning to upgrade a customer from 3300 ICP 9.0 to MiVoice 7.2. I have the 512 RAM for upgrade and I know I have to convert to SDS. How many stairstep upgrades are required? ICP 9.0 to MCD 4.0 then MCD 4.0 to Mivoice 7.2? Thanks for any help!!
-
I am planning to upgrade a customer from 3300 ICP 9.0 to MiVoice 7.2. I have the 512 RAM for upgrade and I know I have to convert to SDS. How many stairstep upgrades are required? ICP 9.0 to MCD 4.0 then MCD 4.0 to Mivoice 7.2? Thanks for any help!!
Two... First upgrade to MCD 4, convert to SDS, make sure all phones flash, then you can go directly to the current version.
Sent from my MotoG3 using Tapatalk
-
If its a MXe it needs a specific MCD4 IIRC,
-
If its a MXe it needs a specific MCD4 IIRC,
Hmm... first I have heard of that... I have used the same MCD 4, SP4 I think, for some time to upgrades. All physical boxes use the same software package.
-
I think they did sp4 to support running it on a MXe III, as well as fix some things for migration.
-
I'd be suggesting that if the controller is still running ICP 9 then a hardware refresh should be on the cards and not just a software upgrade. Also guessing that if it is currently on ICP release then if you aren't refreshing the hardware then having a spare HDD and a good backup handy would be a must as that HDD probably hasn't done very much work for a while and a power down could be the end of it.
-
I'd be suggesting that if the controller is still running ICP 9 then a hardware refresh should be on the cards and not just a software upgrade. Also guessing that if it is currently on ICP release then if you aren't refreshing the hardware then having a spare HDD and a good backup handy would be a must as that HDD probably hasn't done very much work for a while and a power down could be the end of it.
I have to somewhat disagree, although if the customer is open to it I wouldn't discourage it.
Mitel hardware in general has an incredibly long usage life, I have machines that started as ICP 7, maybe older, still happily and efficiently processing calls on MiVB 7.2 and likely will continue to do so on MiVB 8, 9, and 10.
There are literally 30 year old Mitel's out there still chugging along, and many of them will be for another 5 or even 10 years.
That being said, if a customer asks me I tell them the hardware typically has a 7-10 year lifespan for any telephony hardware, regardless of manufacturer.
Sent from my MotoG3 using Tapatalk
-
I still have one running ICP6 and its over 12 years old. Bloody thing won't die.