Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: lundah on March 05, 2015, 12:22:25 PM

Title: Call Duration Display on QSIG T1
Post by: lundah on March 05, 2015, 12:22:25 PM

Running MCD 6.0UR3. I have 2 PRI's to AT&T and 2 QSIG links to an Avaya CM/Aura environment. Call Duration Display works fine on calls involving the PRI trunks, but does not display on calls over the QSIG links. What setting am I missing? COS settings are identical.

Title: Re: Call Duration Display on QSIG T1
Post by: x-man on March 05, 2015, 01:36:21 PM

I believe this is working as designed as the PRI's are classed as public and the Qsig is classed as private (internal) and you don't get a call timer on internal calls. I have a vauge feeling that there is a setting somewhere to make qsig calls public but its only a very vauge recollection. I have the same problem on SIP trunks which are treated as private rather than public....