Mitel Forums - The Unofficial Source
Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: mleitao on November 13, 2014, 09:55:45 AM
-
We have a direct dial that we setup as a test tone that we use to test some microphones. The programmers who work with the mics are complaning that the tone is too low, is there any way to adjust the volume level of the RAD from the MCD 3300. I thought that it would be something in Class of service but I haven't been able to find anything there.
Thanks
-
Other than re-recording the RAD at a higher volume, no. There are no volume adjustments within the MCD.
-
@bluewhite Thanks for the quick response