Messages

196

Mitel MiVoice Business/MCD/3300 / Re: Having problem programming 5550 IP Console on a Mitel 3300 CXi

« on: May 05, 2010, 08:44:59 PM »

I am using Option 125 (ipphone) and Option3 (router).
In the box i received two cable, one cat 5 cable and one white/grey cable. I Connect the white/grey cable on the keypad ethernet port to the inbuild layer 2 switch and the black cat5 cable on the other keypad ethernet port to the pc.

197

Mitel MiVoice Business/MCD/3300 / Re: Having problem programming 5550 IP Console on a Mitel 3300 CXi

« on: May 05, 2010, 08:37:51 PM »

The console assignment form. Do you mean when programming the 5550 IP Console on the Mitel 3300 CXi? If yes, i also that that.

What i did. Manualy add the mac address in the dhcp section and also in the section when programming the 5550 IP Console on the 3300 CXi. When running the software om the PC i can see that the connection is ok.The pc connecting to the keypad is getting ip address and in the lease viewer i can see the static ip and also the ip that the pc is getting. But still red light (Nothinh, Nada, )

198

Mitel MiVoice Business/MCD/3300 / Re: Having problem programming 5550 IP Console on a Mitel 3300 CXi

« on: May 05, 2010, 08:29:29 PM »

I manualy added the mac address when programming the statin ip and also when programming the 5550 ip console on the 3300 icp cxi.
But stil no result...

199

Mitel MiVoice Business/MCD/3300 / Having problem programming 5550 IP Console on a Mitel 3300 CXi

« on: May 05, 2010, 08:20:08 PM »

I am having problem programming a Mitel 5550 IP Console on a Mitel 3300 CXi.
This is what i did:
I program a static ip address for the 5550 IP Console. I also included the mac address of the IP Console when programming the static ip. I also program the 5550 IP Console in the Mitel 3300 CXi I add the mac @ when programming the IP Console. I connect (cat5 cable) the keypad on the Layer 2 switch of the CXi and the other port of the keypad on the PC! I use cat 5 cable"straight cable".   
Run the software of the console on the PC and notice that the connection is ok with the Mitel 3300 ICP CXi. But i am still getting the red light on the top left of the keypad. On the PC i check that the pc is getting an ip address of the dhcp on the Mitel 3300 icp.
I tried almost everything, reinstall the software of the console on the pc, reboot the Keypad, delete the static, programm it once again but nothing !!!
Can somebody help me please!!
In the box i received two cable. One black one (cat5) and a white/grey one (cat5)

200

Mitel MiVoice Business/MCD/3300 / Re: How to setup Loadspeaker Paging on Mitel 3300 CXi

« on: April 28, 2010, 09:29:34 PM »

You will need to program the feature access code for direct page. Make sure that direct page allow is enabled in the class of service. After this you just need to dial the FAC you programmed and the extension of the phone you wish to page.

You can also set up page groups to page multiple sets at once.

Or you can program a direct page button on the set so you don't have to dial the FAC each time.

Thanks for the help

201

Mitel MiVoice Business/MCD/3300 / How to setup vpn between two Cxi

« on: April 26, 2010, 11:30:43 PM »

Can someone tell me how to setup vpn between two cxi ?

202

Mitel MiVoice Business/MCD/3300 / How to setup Loadspeaker Paging on Mitel 3300 CXi

« on: April 26, 2010, 10:12:54 PM »

Can somebody help me how to setup Loadspeaker paging on Mitel 3300 CXi. What i want to program, is to dial an feature access code + extenshon number(internal) in order to page individual extension.

Thanks

203

Mitel MiVoice Business/MCD/3300 / Re: How to connect two 3300 CXi through internet

« on: November 10, 2009, 09:31:38 PM »

I was thinking to use two internet connection with static ip on both location. Connect the internet modem(router) on the wan port of the 3300 CXi and program the system to call through the wan (ip networking license must be added to)

I am close?

204

Mitel MiVoice Business/MCD/3300 / How to connect two 3300 CXi through internet

« on: November 10, 2009, 09:25:33 PM »

I have two Cxi on different location. I trying to connect them throug WAN (Internet) so i can call e set on the other location by dialing the 3 or 4 digits?
Can someone help me with this?

G

205

Mitel MiVoice Business/MCD/3300 / LS trunk on 3300 ICP Cxi

« on: November 10, 2009, 08:13:01 PM »

I am having an issue to activate line reversal on LS trunk on Mitel 3300 ICP CXi. I am receiving analog trunks with line reversal from the local ISP. I activate the reversal on the circuit descriptor but, it's not working. When forwarding a call to a fixed line or mobile the line will stay busy untill i unplug the telephone behind the 3300 ICP.
Can someone help me? Maybe 3300 ICP rel 9.0 don't support line reversal ?

Thanks,

G