Mitel Forums - The Unofficial Source
Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: xdzhao on April 23, 2011, 11:56:27 AM
-
I have a problem on Mitel 3300 IP PBX. Could anyone tell me how to disable the encryption of call control signal on it? I searched on user guide I can only disable the encryption on voice. I think that even though voice encryption can be disabled, there should be a way to disable the encryption on call control signal, too. Thank you very much!
-
I thought like you in that disabling it would disable it for both. And when enabled it would be enabled for both. Not having sniffed it myself, what makes you think the call control is encrypted? If may just be that Wireshark doesn't have knowledge of MiNet?
-Chak
-
I have captured some pcap files for Mitel. The voice is G711 no encryption. However the call control signal is encrypted. Not only the wireshark does not recognize this protocol. When the phone made the same action, I got totally different data every time. So I am looking a way to disable the encryption on call control signal. If you can help me please tell how to do. Thank you very much!
-
Correct me if I am wrong but this is matai signaling so there isnt a way to the general public to unencrypt it.
-
According to Mitel documents, this encryption use 128 bit AES. They also said the voice use the same encryption rule. However I can only find a way to disable the encryption on voice. I don
-
Well voice encryption is disabled through system options, call control is another ball of wax.
-
Thank you very much for reply. Since there is no way to disable it, I will try to find some other way to get the call control info. Thanks again.
-
What are you trying to do if you dont mind me asking.
-
I thought call control was purposely encrypted because it was proprietary to MiNet and not an open standard like SIP? And that anything like an external call record system got SMDR so it could work with the system?
-
We design some products to make the call recording system. I can figure out the useful info for call recording system of Mitel protocol. However if the data is encrypted, I won
-
I thought that most recorders used Mitai data to get the data for the calls.
-
Yes that is correct with the use of the Mitai Control Libraries.
-
Would you tell me how to get Mitai data? Use CTI? or get it from the IP packets? Thanks.