Mitel Forums - The Unofficial Source
Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: msouva on April 11, 2017, 01:38:14 PM
-
I have been searching for an answer to this and I am in the process of opening a ticket with our Mitel vendor. I was wondering what is the maximum number of ringing IP phone sets on a Mitel 3300 with version 8.0 PR3. 14.0.0.97. I see from notes and other posts from 32 (the number of phones in a group)
Here is what I am looking at for this issue. I have a front door phone that when the button is pushed it dials to a suite that has six analog extensions tied to it. The IP phones in the building all have a multicall button programmed on the phone set with one of these six analog extensions. I have approximately 130+ phones that are set up like this. It is my understanding that not all these phones will ring. I would agree with this with analog phones and possible digital phones that would have a ringer equivalence number, but these IP phones get their power from the network POE switch and would not draw down like the REN phones would.
Thoughts?
Mark
-
The limit depends on the controller being used, and is tied to the available IP signalling ports on the controller processor. A more robust controller will have a higher limit.
-
The limit depends on the controller being used, and is tied to the available IP signalling ports on the controller processor. A more robust controller will have a higher limit.
I thought that was set paging... Doesn't ringing have a hard 172 appearance limit?
-
The limit depends on the controller being used, and is tied to the available IP signalling ports on the controller processor. A more robust controller will have a higher limit.
I thought that was set paging... Doesn't ringing have a hard 172 appearance limit?
You may be right.
-
I got a call back from our vendor here and they said that the maximum number of IP phones the system can ring is 200.