Show Posts
1
Non-Mitel Chatter / Hello All
« on: April 13, 2021, 02:43:27 PM »
Hello Everyone.
Time to introduce myself. My name is J. I am an SDM, PM in IT of 20+ years. Live in the UK etc.
Right well this isn't a dating app sooo...
As Johnny 5 says... I need input!!
Its why we all come here isn't it?
So i have been handed a request to install 3 digital phones from a Phybridge. I haven't dealt with a phybridge setup before. The site layout is.
Two buildings with links between. Main comms room with Phybridge units x2 and a Main voice frame in building A which in turn links via a 100 pair voice to a DP in building B and that DP links to a cat5 panel in a cabinet in building B.
Within Building B from the cabinet there are Cat 5 outlets to the offices where the phones are required. There are also Voice outlets next to each data outlet. ie building B can operate either structured or unstructured.
The question i have is how i link all this up?
As far as I can understand from a brief look.
In Building B. Plug digital phones into cat5 outlets. In cabinet link from wall outlet patch panel to "100Pair" voice patch panel.
In Building A. Link from other end of 100 pair on Main voice frame to Phybridge.
Is this right? How do i create the link in Building A from Voice frame to Phybridge?
What are the implications of running the 3 digital lines over the 100 pair in terms of crossover impact on other pairs of non digital lines?
Any help or advice much appreciated.
Time to introduce myself. My name is J. I am an SDM, PM in IT of 20+ years. Live in the UK etc.
Right well this isn't a dating app sooo...
As Johnny 5 says... I need input!!
Its why we all come here isn't it?
So i have been handed a request to install 3 digital phones from a Phybridge. I haven't dealt with a phybridge setup before. The site layout is.
Two buildings with links between. Main comms room with Phybridge units x2 and a Main voice frame in building A which in turn links via a 100 pair voice to a DP in building B and that DP links to a cat5 panel in a cabinet in building B.
Within Building B from the cabinet there are Cat 5 outlets to the offices where the phones are required. There are also Voice outlets next to each data outlet. ie building B can operate either structured or unstructured.
The question i have is how i link all this up?
As far as I can understand from a brief look.
In Building B. Plug digital phones into cat5 outlets. In cabinet link from wall outlet patch panel to "100Pair" voice patch panel.
In Building A. Link from other end of 100 pair on Main voice frame to Phybridge.
Is this right? How do i create the link in Building A from Voice frame to Phybridge?
What are the implications of running the 3 digital lines over the 100 pair in terms of crossover impact on other pairs of non digital lines?
Any help or advice much appreciated.