Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: abmitel on June 12, 2021, 02:49:08 AM

Title: MIVB Ax controller no dial tone after seizure of pri line on analog extension
Post by: abmitel on June 12, 2021, 02:49:08 AM

Hi

i dont get pstn dialtone on analog extension when user dials pri access code , i have enabled second dial tone =yes in ARS leading digit

Regards

Title: Re: MIVB Ax controller no dial tone after seizure of pri line on analog extension
Post by: acejavelin on June 12, 2021, 10:51:35 AM

PRI's don't provide dialtone in general, they don't use DTMF so why prompt a user for a tone... You would simulate that by providing dialtone from the system after the leading digit.

Title: Re: MIVB Ax controller no dial tone after seizure of pri line on analog extension
Post by: johnp on June 13, 2021, 06:17:53 PM

If he is talking about return dial tone after leading digit, then there is an issue, unless there are no additional digits to analyze