Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: sadzas on October 15, 2009, 04:06:57 PM

Title: SIP Trunk - I wanna see the trunk name.
Post by: sadzas on October 15, 2009, 04:06:57 PM

Hi all.

I have configurated a SIP trunk with some ISP. I have set two ports to this trunk also and these ports are used for attendant. I use the SIP PEER PROFILE BY INCOMING DID too (using "System Speed Call Asignment"). So, depending of the incoming number, it will go to ports (Attendant) or directly to extensions.

The thing is:

I wanna see the trunk's name on my Mitel display.

How can I do that?

- If I set "PRIVATE SIP TRUNK" I can see the name... but the attendant stops work. I mean, I dont hear the attendant voice, I hear the voicemail operator voice: "Please enter you VM number"...

PLEASE!! How can I see the trunk name!!!???

Title: Re: SIP Trunk - I wanna see the trunk name.
Post by: ralph on October 16, 2009, 07:57:52 AM

Not sure about this but, have you turned off anything to do whit ANI/DNIS display in the COS?

What are you seeing now?

Ralph
www.twitter.com/ralphatsuntel (http://www.twitter.com/ralphatsuntel)

Title: Re: SIP Trunk - I wanna see the trunk name.
Post by: sadzas on October 16, 2009, 08:23:36 AM

Right now, I see the caller ID.

and yes, I have turned off everything ANI/DNIS display...

Title: Re: SIP Trunk - I wanna see the trunk name.
Post by: sadzas on October 16, 2009, 10:00:21 AM

I'm a such a dump!!! sorry all!

I set the CoS in Trunk Service Assignment, but I didnt in the extension.

Sorry!

(Thanks a lot Ralph!!!)