Mitel Forums - The Unofficial Source
Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: abonabeel on February 25, 2011, 08:08:51 AM
-
Hi All,
I installed SVP server and traying to configure it but I have problem when SpectraLink Wireless telephone trying to connect
but cann't find SVP server.
please advice
rgards
Moh
-
If I understand well your Spektralink phones cannot find your SVP server. Did you put the needed DHCP options in your DHCP server? You need option 151 (IP address of your SVP).
-
Hi,
Yes I already add option 151 on DHCP. and the DHCP running on 3300 MXe or shall i use external DHCP server?
regards
Moh
-
Did you configured the First to Last Alias IP address in the SVP-II configuration part.
"The SVP Server uses an IP address when acting as a proxy for the wireless telephone. Therefore, one alias IP address is required for every installed SpectraLink 8000 Wireless Telephone. These IP addresses must be entered as a range and must be assigned solely for this purpose." Stated from the SVP server administrator guide
Hope this helps.