Mitel Forums - The Unofficial Source

Mitel Forums => Mitel SX200, SX2000, and older SX platforms => Topic started by: johnlowe on April 06, 2015, 08:14:06 AM

Title: Mitel 2000 trunk card PINOUT
Post by: johnlowe on April 06, 2015, 08:14:06 AM

Hello,

I am installing a Mitel 2000 trunk "MC340BA", does anyone know what the PINOUT is for the 8 trunks?

Thanks

Title: Re: Mitel 2000 trunk card PINOUT
Post by: ralph on April 06, 2015, 08:22:55 AM

Remember that each amp cable will cover either the top half or the bottom half of 3 cards.
So if you're looking at slot 1, then the pins are
W/B - T1
W/O -NA
W/G - T2
W/B - NA
W/S - T3
R/B - NA
R/O - T 4

The bottom amp will pin out trunks T5 through T8

Ralph




 skip a pair, W/G, skip a pair, W/S, skip a pair,