Topics

1

Mitel MiVoice Business/MCD/3300 / Migrating from MXE to MXE III chassis

« on: June 10, 2019, 01:12:28 PM »

I have a customer that I need to migrate the 8.0 SP1 database from a MXE to a MXE III controller.

My current thought is to upgrade the MXE III to 8.0 SP1 then back up the current database and restore it into the new controller.  Then clear and re-sync the hardware ID.

My half backed thought is to move the Raid board, drives, and the i-button to the new controller and then after power up presto it all works.

The customer being out of service is not an issue as i will be able to take the controller back to the lab and do all of this over a weeks time.

Any thoughts or ideas will be greatly appreciated.

Thanks,

2

Mitel Software Applications / Analog Extension Mailboxes on a Nupoint

« on: July 08, 2015, 10:34:44 AM »

I'm having trouble building a voicemail box for my analog extensions in NuPoint.  I have extensions built on an ASUII, but when i go to choose my Device type in the Phone tab of users and services, analog is not a choice.  What am i doing wrong?  Thanks in advance.

3

Mitel Software Applications / customer changing ISP not sure all the places to make this change

« on: February 27, 2015, 11:50:19 AM »

I have a customer that we took over service for who is changing his ISP.  The original install was done by Mitel professional services so I am only slightly aware of what is going on, add to that my limited knowledge of the MAS and MBG.
This customer has:
CXii
vMCD
vMBG
vMAS w/MBG

I’m trying to find all the places that would have to be changed to his new public address’s, This is what I found so far.
In the MBG configuration tab/networkprofiles/custom configuration/ I have found:

vMBG                   ICP-Side 192.168.70.1
                              set-side 2xx.xxx.xxx.10

vMAS MBG          ICP-side 2xx.xxx.xxx.3
                              set-side 2xx.xxx.xxx.3

Is this the only place I have to change the address’s?
Do I need to do anything in the base MSL that these run on?
How will this affect the AMC?
Thanks in advance for all help.

4

Mitel MiVoice Business/MCD/3300 / customer changing ISP need to populate new static address's where????

« on: February 27, 2015, 11:48:04 AM »

I have a customer that we took over service for who is changing his ISP.  The original install was done by Mitel professional services so I am only slightly aware of what is going on, add to that my limited knowledge of the MAS and MBG.
This customer has:
CXii
vMCD
vMBG
vMAS w/MBG

I’m trying to find all the places that would have to be changed to his new block of public address’s, This is what I found so far.
In the MBG configuration tab/networkprofiles/custom configuration/ I have found:

vMBG                   ICP-Side 192.168.70.1
                              set-side 2xx.xxx.xxx.10

vMAS MBG          ICP-side 2xx.xxx.xxx.3
                              set-side 2xx.xxx.xxx.3

Is this the only place I have to change the address’s?
Do I need to do anything in the base MSL that these run on?
How will this affect the AMC?
Thanks in advance for all help.

5

MiVoice Office 250/Mitel 5000 / Mitel 5000 IP Phones as VPN clients

« on: February 20, 2014, 10:47:19 AM »

Have a customer that wants to use the 5330 phones as VPN Clients, is that possible? 

Looking for any help possible.

Thanks

6

MiVoice Office 250/Mitel 5000 / Demo/Lab License

« on: October 01, 2013, 10:57:55 AM »

What license configuration would be good to use as a Lab system.  WE have gotten the OK to order up a system with Demo/Lab license to use for learning purposes.  Any help would be appreciated.

Thanks,

7

Mitel Jobs and Mitel Careers / Mitel Job In Washington State Kirkland Everett area w/Frontier Communications

« on: July 09, 2013, 01:04:37 PM »

Frontier is looking to Hire a Mitel 5000/3300 tech.  Here is a link to the job posting

Job # 309718-798  Business Zone Tech

https://frontier.silkroad.com/epostings/index.cfm?fuseaction=app.jobsearch

Not sure how much longer this will be open for, apply soon if interested.