Mitel Forums - The Unofficial Source
Mitel Forums => MiVoice Office 250/Mitel 5000 => Topic started by: jventresco on September 25, 2017, 12:56:38 PM
-
Hi
Our outbound is working to VoIP.MS and inbound is passing through our firewall. Inbound SIP does not ring system. We set up a call routing table but am unsure where that is hooked into the trunk group. Is there a way to monitor the inbound 5060 or any gotchas people often miss? We are at the latest vserion 6.2.5.80 on a 250. Do we need to open ports for the 5060 to pass through? (on the mitel) the ports are opened and NATing in the firewall.
-
MAke sure the the ring in destination is set in your trunk group.
Go to System>Devices and Feature Codes>SIP Peers >92001 (or whatever your using for you SIP trunk group)>Trunk Group Configuration
In there you will see Day and Night ring in types. Set them to the appropriate call routing tables