Mitel Forums > SIP On Mitel

UC360 Not Registering

<< < (2/3) > >>

johnp:
Did you change from New Zealand, and if using vlan enable it?

irongladiator:

--- Quote from: johnp on April 01, 2017, 09:36:15 PM ---Did you change from New Zealand, and if using vlan enable it?

--- End quote ---

johnp,
Concerning the "Country Variant" setting with the default being New Zealand (versus North America) have you noticed anything from one to the other? I have not, but I always change it to North America. (Our customer(s) are here in the states).

Thanks,
-Iron

johnp:
In the past, I had one way audio upon first boot and after the change it worked as expected. Not certain if the change made any difference, or the reboot solved it. I just now by default make those 2 changes. FWIW, haven't had a one way issue since I've done this.

kjassal:
Thanks for the post guys,

I'd changed the country variant to UK as with all other UC360's on our network; the default was New Zealand.
This had no effect on this particular unit, I've since sent it back to my supplier for a replacement.
Hopefully, I have better luck with the new unit.
I was just worried that I may have reached some sort of threshhold on how many of these devices you can have.

lundah:
The only difference I've noticed with the default country thing is the call progress tones are different. If I have more than a couple, I try to set them up with a common config file sitting on a server, and set DHCP option 66 to tell the UC360 where to find it.

Navigation

[0] Message Index

[#] Next page

[*] Previous page